Lesson plan

Temperature jump

The temperature jump method is a technique used in chemical kinetics for the measurement of very rapid reaction rates. It is one of a class of chemical relaxation methods pioneered by the German physical chemist Manfred Eigen in the 1950s. In these methods, a reacting system initially at equilibrium is perturbed rapidly and then observed as it relaxes back to equilibrium. In the case of temperature jump, the perturbation involves rapid heating which changes the value of the equilibrium constant, followed by relaxation to equilibrium at the new temperature. The heating usually involves discharging of a capacitor (in the kV range) through a small volume ( {\Delta H^o} = {RT^2}.\frac{d \ln K}{dT} where R is the universal gas constant and T is the absolute temperature. When a single step in a reaction is perturbed in a temperature jump experiment, the reaction follows a single exponential decay function with time constant (\tau) equal to a function of the forward (k a ) and reverse (k b ) rate constants. For the perturbation of a simple equilibrium A B which is first order in both directions, the reciprocal of the time constant equals the sum of the two rate constants : 1/\tau = k_a + k_b The two rate constants can be determined from the values of (\tau) and the equilibrium constant : K = k_a / k_b , yielding two equations for two unknowns.…

Back to article

Article summary

The temperature jump method is a technique used in chemical kinetics for the measurement of very rapid reaction rates. It is one of a class of chemical relaxation methods pioneered by the German physical chemist Manfred Eigen in the 1950s. In these methods, a reacting system initially at equilibrium is perturbed rapidly and then observed as it relaxes back to equilibrium. In the case of temperature jump, the perturbation involves rapid heating which changes the value of the equilibrium constant, followed by relaxation to equilibrium at the new temperature. The heating usually involves discharging of a capacitor (in the kV range) through a small volume ( {\Delta H^o} = {RT^2}.\frac{d \ln K}{dT} where R is the universal gas constant and T is the absolute temperature. When a single step in a reaction is perturbed in a temperature jump experiment, the reaction follows a single exponential decay function with time constant (\tau) equal to a function of the forward (k a ) and reverse (k b ) rate constants. For the perturbation of a simple equilibrium A B which is first order in both directions, the reciprocal of the time constant equals the sum of the two rate constants : 1/\tau = k_a + k_b The two rate constants can be determined from the values of (\tau) and the equilibrium constant : K = k_a / k_b , yielding two equations for two unknowns.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.