Tension (physics)

team to the right.

Uses your system voice; voice and rate in settings.

≈ 5 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Tension is the pulling or stretching force transmitted axially along an object such as a string, rope, chain, rod, truss member, or other object, so as to stretch or pull apart the object. In terms of force, it is the opposite of compression. Tension might also be described as the action-reaction pair of forces acting at each end of an object.

At the atomic level, when atoms or molecules are pulled apart from each other and gain potential energy with a restoring force still existing, the restoring force might create what is also called tension. Each end of a string or rod under such tension could pull on the object it is attached to, in order to restore the string/rod to its relaxed length.

Tension (as a transmitted force, as an action-reaction pair of forces, or as a restoring force) is measured in newtons in the International System of Units (or pounds-force in Imperial units). The ends of a string or other object transmitting tension will exert forces on the objects to which the string or rod is connected, in the direction of the string at the point of attachment.

These forces due to tension are also called "passive forces". There are two basic possibilities for systems of objects held by strings: either acceleration is zero and the system is therefore in equilibrium, or there is acceleration, and therefore a net force is present in the system.The C.G.S unit of Surface tension is dynespercentimeters -\frac{\mathrm{d}}{\mathrm{d}x} \bigg[ \tau(x) \frac{\mathrm{d}\rho(x)}{\mathrm{d}x} \bigg]+v(x)\rho(x) = \omega^2\sigma(x)\rho(x) where v(x) is the force constant per unit length [units force per area] and \omega^2 are the eigenvalues for resonances of transverse displacement \rho(x) on the string, with solutions that include the various harmonics on a stringed instrument.

Tension is also used to describe the force exerted by the ends of a three-dimensional, continuous material such as a rod or truss member. In this context, tension is analogous to negative pressure. A rod under tension elongates.

The amount of elongation and the load that will cause failure both depend on the force per cross-sectional area rather than the force alone, so stress = axial force / cross sectional area is more useful for engineering purposes than tension. Stress is a 3x3 matrix called a tensor, and the \sigma_{11} element of the stress tensor is tensile force per area, or compression force per area, denoted as a negative number for this element, if the rod is being compressed rather than elongated.

Thus, one can obtain a scalar analogous to tension by taking the trace of the stress tensor. \sum \vec{F} = 0 For example, consider a system consisting of an object that is being lowered vertically by a string with tension, T, at a constant velocity. The system has a constant velocity and is therefore in equilibrium because the tension in the string, which is pulling up on the object, is equal to the weight force, mg ("m" is mass, "g" is the acceleration caused by the gravity of Earth), which is pulling down on the object. \sum \vec{F} = \vec{T} - m\vec{g} = 0 \sum \vec{F} \ne 0 For example, consider the same system as above but suppose the object is now being lowered with an increasing velocity downwards (positive acceleration) therefore there exists a net force somewhere in the system.

In this case, negative acceleration would indicate that |mg| > |T| . \sum \vec{F} = \vec{T} - m\vec{g} \ne 0 In another example, suppose that two bodies A and B having masses m_1 and m_2 , respectively, are connected with each other by an inextensible string over a frictionless pulley. There are two forces acting on the body A: its weight ( w_1=m_1g ) pulling down, and the tension T in the string pulling up.

Therefore, the net force F_1 on body A is w_1-T , so m_1a=m_1g-T . In an extensible string, Hooke's law applies.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1345019445 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001345019445 · captured 2026-03-23 · ledger · version history

Cite this page as: encyclopegia.org, “Tension (physics)”, snapshot enwiki-001345019445. https://encyclopegia.org/a/tension-physics

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.