Lesson plan

Teramac

The Teramac was an experimental massively parallel computer designed by HP in the 1990s. The name reflected the project's vision to provide a field programmable gate array (FPGA) system with capacity for a million gates running at a megahertz. Contrary to traditional systems, which are useless if there is one defect, Teramac used defective processors intentionally, to demonstrate its defect-tolerant architecture. Even though the computer had 220,000 hardware defects, it was able to perform some tasks 100 times faster than a single-processor high-end workstation. Teramac was originally developed by scientists in HP's central research lab, HP Labs, in the mid 1990s. Although it contained conventional silicon integrated circuit technology, it paved the way for some of HP's work in nanoelectronics because it provided an architecture on which a chemically assembled computer could operate. The machine used 864 FPGA chips, some for computing, others for routing signals. The experience from this program was used to design the Field Programmable Nanowire Interconnect circuit.

Back to article

Article summary

The Teramac was an experimental massively parallel computer designed by HP in the 1990s. The name reflected the project's vision to provide a field programmable gate array (FPGA) system with capacity for a million gates running at a megahertz. Contrary to traditional systems, which are useless if there is one defect, Teramac used defective processors intentionally, to demonstrate its defect-tolerant architecture. Even though the computer had 220,000 hardware defects, it was able to perform some tasks 100 times faster than a single-processor high-end workstation. Teramac was originally developed by scientists in HP's central research lab, HP Labs, in the mid 1990s. Although it contained conventional silicon integrated circuit technology, it paved the way for some of HP's work in nanoelectronics because it provided an architecture on which a chemically assembled computer could operate. The machine used 864 FPGA chips, some for computing, others for routing signals. The experience from this program was used to design the Field Programmable Nanowire Interconnect circuit.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.