ternarni diagram

, showing which mixtures of methane, oxygen gas, and inert nitrogen gas will burn A ternary plot, ternary graph, triangle plot, simplex plot, or Gibbs triangle is a barycentric plot on three variables which sum to a constant. It graphically depicts the ratios of the three variables as positions in an equilateral triangle. It is used in physical chemistry, petrology, mineralogy, metallurgy, and other physical sciences to show the compositions of systems composed of three species. Ternary plots are tools for analyzing compositional data in the three-dimensional case. In population genetics, a triangle plot of genotype frequencies is called a de Finetti diagram. In game theory and convex optimization, it is often called a simplex plot. In a ternary plot, the values of the three variables , , and must sum to some constant, . Usually, this constant is represented as 1.0 or 100%. Because for all substances being graphed, any one variable is not independent of the others, so only two variables must be known to find a sample's point on the graph: for instance, must be equal to . Because the three numerical values cannot vary independently—there are only two degrees of freedom—it is possible to graph the combinations of all three variables in only two dimensions.…

, showing which mixtures of methane, oxygen gas, and inert nitrogen gas will burn A ternary plot, ternary graph, triangle plot, simplex plot, or Gibbs triangle is a barycentric plot on three variables which sum to a constant. It graphically depicts the ratios of the three variables as positions in an equilateral triangle. It is used in physical chemistry, petrology, mineralogy, metallurgy, and other physical sciences to show the compositions of systems composed of three species. Ternary plots are tools for analyzing compositional data in the three-dimensional case. In population genetics, a triangle plot of genotype frequencies is called a de Finetti diagram. In game theory and convex optimization, it is often called a simplex plot. In a ternary plot, the values of the three variables , , and must sum to some constant, . Usually, this constant is represented as 1.0 or 100%. Because for all substances being graphed, any one variable is not independent of the others, so only two variables must be known to find a sample's point on the graph: for instance, must be equal to . Because the three numerical values cannot vary independently—there are only two degrees of freedom—it is possible to graph the combinations of all three variables in only two dimensions. The advantage of using a ternary plot for depicting chemical compositions is that three variables can be conveniently plotted in a two-dimensional graph. Ternary plots can also be used to create phase diagrams by outlining the composition regions on the plot where different phases exist. The values of a point on a ternary plot correspond (up to a constant) to its trilinear coordinates or barycentric coordinates.

Reading values on a ternary plot

There are three equivalent methods that can be used to determine the values of a point on the plot: Parallel line or grid method. The first method is to use a diagram grid consisting of lines parallel to the triangle edges. A parallel to a side of the triangle is the locus of points constant in the component situated in the vertex opposed to the side. Each component is 100% in a corner of the triangle and 0% at the edge opposite it, decreasing linearly with increasing distance (perpendicular to the opposite edge) from this corner. By drawing parallel lines at regular intervals between the zero line and the corner, fine divisions can be established for easy estimation. Perpendicular line or altitude method. For diagrams that do not possess grid lines, the easiest way to determine the values is to determine the shortest (i.e. perpendicular) distances from the point of interest to each of the three sides. By Viviani's theorem, the distances (or the ratios of the distances to the triangle height) give the value of each component. Corner line or intersection method. The third method does not require the drawing of perpendicular or parallel lines. Straight lines are drawn from each corner, through the point of interest, to the opposite side of the triangle. The lengths of these lines, as well as the lengths of the segments between the point and the corresponding sides, are measured individually. The ratio of the measured lines then gives the component value as a fraction of 100%. A displacement along a parallel line (grid line) preserves the sum of two values, while motion along a perpendicular line increases (or decreases) the two values an equal amount, each half of the decrease (increase) of the third value. Motion along a line through a corner preserves the ratio of the other two values.

Derivation from Cartesian coordinates

Figure (1) shows an oblique projection of point in a 3-dimensional Cartesian space with axes , and , respectively. If (a positive constant), is restricted to a plane containing , and . If , and each cannot be negative, is restricted to the triangle bounded by , and , as in (2). In (3), the axes are rotated to give an isometric view. The triangle, viewed face-on, appears equilateral. In (4), the distances of from lines , and are denoted by , and , respectively. For any line in vector form ( is a unit vector) and a point , the perpendicular distance from to is \left\| (\mathbf{s}-\mathbf{p}) - \bigl((\mathbf{s}-\mathbf{p}) \cdot \mathbf{\hat n}\bigr)\mathbf{\hat n} \right\| \,. In this case, point is at \mathbf{p} = \begin{pmatrix}a\\b\\c\end{pmatrix} \,. Line has \mathbf{s} = \begin{pmatrix}0\\K\\0\end{pmatrix} \quad\text{and}\quad \mathbf{\hat{n}} = \frac{\begin{pmatrix}0\\K\\0\end{pmatrix} - \begin{pmatrix}0\\0\\K\end{pmatrix}}{\left\|\begin{pmatrix}0\\K\\0\end{pmatrix} - \begin{pmatrix}0\\0\\K\end{pmatrix}\right\|} = \frac{\begin{pmatrix}0\\K\\-K\end{pmatrix}}{\sqrt{0^2+K^2+{(-K)}^2}} = \begin{pmatrix}0\\\frac{1}{\sqrt 2}\\-\frac{1}{\sqrt 2}\end{pmatrix} \,. Using the perpendicular distance formula, \begin{align} a' & = \left\| \begin{pmatrix}-a\\K-b\\-c\end{pmatrix} - \left( \begin{pmatrix}-a\\K-b\\-c\end{pmatrix} \cdot \begin{pmatrix}0\\\frac{1}{\sqrt 2}\\-\frac{1}{\sqrt 2}\end{pmatrix} \right) \begin{pmatrix}0\\\frac{1}{\sqrt 2}\\-\frac{1}{\sqrt 2}\end{pmatrix} \right\| \\[10px] & = \left\| \begin{pmatrix}-a\\K-b\\-c\end{pmatrix} - \left( 0 + \frac{K-b}{\sqrt{2}} + \frac{c}{\sqrt{2}} \right) \begin{pmatrix}0\\\frac{1}{\sqrt 2}\\-\frac{1}{\sqrt 2}\end{pmatrix} \right\| \\[10px] & = \left\| \begin{pmatrix}-a\\K-b-\frac{K-b+c}{2}\\-c+\frac{K-b+c}{2}\end{pmatrix} \right\| = \left\| \begin{pmatrix}-a\\\frac{K-b-c}{2}\\\frac{K-b-c}{2}\end{pmatrix} \right\| \\[10px] & = \sqrt{{(-a)}^2 + {\left(\frac{K-b-c}{2}\right)}^2 + {\left(\frac{K-b-c}{2}\right)}^2} = \sqrt{a^2 + \frac{{(K-b-c)}^2}{2}} \,. \end{align} Substituting , a' = \sqrt{a^2 + \frac{{(a+b+c-b-c)}^2}{2}} = \sqrt{a^2 + \frac{a^2}{2}} = a\sqrt{\frac{3}{2}} \,. Similar calculation on lines and gives b' = b\sqrt{\frac{3}{2}} \quad\text{and}\quad c' = c\sqrt{\frac{3}{2}} \,. This shows that the distance of the point from the respective lines is linearly proportional to the original values , and .

Plotting a ternary plot

Cartesian coordinates are useful for plotting points in the triangle. Consider an equilateral ternary plot where is placed at and at . Then is (\frac{1}{2}, \frac{\sqrt{3}}{2}), and the triple is \left(\frac{1}{2}\cdot\frac{2b+c}{a+b+c},\frac{\sqrt{3}}{2}\cdot\frac{c}{a+b+c}\right) \,.

Example

triangle from the United States Department of Agriculture This example shows how this works for a hypothetical set of three soil samples:

Plotting the points

External links

Text derived from https://en.wikipedia.org/w/index.php?oldid=1347877585 under CC BY-SA 4.0; modifications have been made.