Lesson plan

Threshold voltage

(left, using logarithmic y-axis) and a simulation of the electron density (right) forming a conductive inversion channel which connects at the ~0.45 V threshold voltage. Extremely little current flows below this voltage. The threshold voltage, commonly abbreviated as V th or V GS(th) , of a field-effect transistor (FET) is the minimum gate-to-source voltage (V GS ) that is needed to create a conducting path between the source and drain terminals. It is an important scaling factor to maintain power efficiency. When referring to a junction field-effect transistor (JFET), the threshold voltage is often called pinch-off voltage instead. This is somewhat confusing since pinch off applied to insulated-gate field-effect transistor (IGFET) refers to the channel pinching that leads to current saturation behavior under high source–drain bias, even though the current is never off. Unlike pinch off, the term threshold voltage is unambiguous and refers to the same concept in any field-effect transistor.

Back to article

Article summary

(left, using logarithmic y-axis) and a simulation of the electron density (right) forming a conductive inversion channel which connects at the ~0.45 V threshold voltage. Extremely little current flows below this voltage. The threshold voltage, commonly abbreviated as V th or V GS(th) , of a field-effect transistor (FET) is the minimum gate-to-source voltage (V GS ) that is needed to create a conducting path between the source and drain terminals. It is an important scaling factor to maintain power efficiency. When referring to a junction field-effect transistor (JFET), the threshold voltage is often called pinch-off voltage instead. This is somewhat confusing since pinch off applied to insulated-gate field-effect transistor (IGFET) refers to the channel pinching that leads to current saturation behavior under high source–drain bias, even though the current is never off. Unlike pinch off, the term threshold voltage is unambiguous and refers to the same concept in any field-effect transistor.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.