Tibetan script

Uses your system voice; voice and rate in settings.

Snapshot

≈ 10 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Tibetan script is a segmental writing system, or abugida, forming a part of the Brahmic scripts, and used to write certain Tibetic languages, including Tibetan, Dzongkha, Sikkimese, Ladakhi, Jirel and Balti. Its exact origins are a subject of research but it is traditionally considered to have been developed by Thonmi Sambhota for King Songtsen Gampo.

The Tibetan script has also been used for some non-Tibetic languages in close cultural contact with Tibet, such as Thakali and Nepali. The printed form is called uchen script while the hand-written form used in everyday writing is called umê script. This writing system is especially used across the Himalayan Region.

The Tibetan script is a segmental writing system, or abugida, forming a part of the Brahmic scripts, and used to write certain Tibetic languages, including Tibetan, Dzongkha, Sikkimese, Ladakhi, Jirel and Balti. Its exact origins are a subject of research but it is traditionally considered to have been developed by Thonmi Sambhota for King Songtsen Gampo.

The Tibetan script has also been used for some non-Tibetic languages in close cultural contact with Tibet, such as Thakali and Nepali. The printed form is called uchen script while the hand-written form used in everyday writing is called umê script. This writing system is especially used across the Himalayan Region.

History

Little is known about the exact origins of Tibetan script. According to Tibetan historiography, it was developed during the reign of King Songtsen Gampo by his minister Thonmi Sambhota, who was sent to India along with other scholars to study Buddhism along with Sanskrit. They developed the Tibetan script from the Gupta script while at the Pabonka Hermitage.

This occurred , towards the beginning of Songtsen Gampo's reign. There were 21 Sutra texts held by the King which were translated afterwards. In the first half of the 7th century, the Tibetan script was used for the codification of these sacred Buddhist texts, for written civil laws, and for a Tibetan Constitution.

Earliest sources on Tibet, such as the Old Tibetan Chronicle, do not mention any Thonmi Sambhota. Scripts predating Songtsen Gampo might have existed but in any case do not appear to be widely used. Researchers postulate that Tibetan kings sought to develop a system of writing as their territory expanded.

The script resembling the version today was likely developed in the second half of the 11th century. New research and writings also suggest that there were one or more Tibetan scripts in use prior to the introduction of the script by Songtsen Gampo and Thonmi Sambhota.

The incomplete Dunhuang manuscripts are the key evidence for this hypothesis, while the few discovered and recorded Old Tibetan Annals manuscripts date from 650 and therefore post-date the c. 620 date of development of the original Tibetan script. Van Schaik (2011) states that the Late Gupta script of Nepal and Northern India is to be considered as the most likely primary model for the Tibetan script.

Van Schaik concludes that the Tibetan script was likely finalized in the 630s or 640s, around the time the Tibetan Empire began formally developing its written administrative system. Although Tönmi Sambhota’s historical existence cannot be confirmed, the evidence supports the idea that a Tibetan mission or similar effort went to India to study writing.

The Tibetan script appears to have developed through two stages of Indic influence: early Gupta forms and later developments associated with Siddhamātṛkā. Van Schaik proposes that Late Gupta forms reached Tibet throughout the 6th century, after which the Tibetan court deliberately undertook a project to create a new script adapted to the phonetics of Tibetan, also incorporating new developments seen in the Siddhamātṛkā found in Northern india.

This new script became the first version of the Tibetan script, attested later by inscriptions of the 8th century.

Description

"Om mani padme hum"

Consonant clusters

, Tarim Basin. 13th century CE One aspect of the Tibetan script is that the consonants can be written either as radicals or they can be written in other forms, such as subscript and superscript forming consonant clusters. To understand how this works, one can look at the radical /ka/ and see what happens when it becomes /kra/ or /rka/ (pronounced /ka/).

In both cases, the symbol for /ka/ is used, but when the /ra/ is in the middle of the consonant and vowel, it is added as a subscript. On the other hand, when the /ra/ comes before the consonant and vowel, it is added as a superscript. /ra/ actually changes form when it is above most other consonants, thus rka. However, an exception to this is the cluster /rɲa/.

Similarly, the consonants /ra/, and /ja/ change form when they are beneath other consonants, thus /ʈ ~ ʈʂa/; /ca/. Besides being written as subscripts and superscripts, some consonants can also be placed in prescript, postscript, or post-postscript positions.

For instance, the consonants /kʰa/, /tʰa/, /pʰa/, /ma/ and /a/ can be used in the prescript position to the left of other radicals, while the position after a radical (the postscript position), can be held by the ten consonants /kʰa/, /na/, /pʰa/, /tʰa/, /ma/, /a/, /ra/, /ŋa/, /sa/, and /la/. The third position, the post-postscript position is solely for the consonants /tʰa/ and /sa/.

Head letters

The head ( in Tibetan, Wylie: mgo) letter, or superscript, position above a radical is reserved for the consonants /ra/, /la/, and /sa/. When /ra/, /la/, and /sa/ are in superscript position with /ka/, /t͡ʃa/, /ta/, /pa/ and /t͡sa/, there are no changes to their sounds in Lhasa Tibetan, for example: /ka/, /ta/, /pa/, /t͡sa/ /ka/, /t͡ʃa/, /ta/, /pa/, /ka/, /ta/, /pa/, /t͡sa/ When /ra/, /la/, and /sa/ are in superscript position with /kʰa/, /t͡ʃʰa/, /tʰa/, /pʰa/ and /t͡sʰa/, they lose their aspiration and become voiced in Lhasa Tibetan, for example: /ga/, /d͡ʒa/, /da/, /ba/, /dza/ /ga/, /d͡ʒa/, /da/, /ba/, /ga/, /da/, /ba/ When /ra/, /la/, and /sa/ are in superscript position with the nasal consonants /ŋa/, /ɲa/, /na/ and /ma/, they receive a high tone in Lhasa Tibetan, for example: /ŋa/, /ɲa/, /na/, /ma/ /ŋa/ /ŋa/, /ɲa/, /na/, /ma/ When /la/ is in superscript position with /ha/, it becomes a voiceless alveolar lateral approximant in Lhasa Tibetan: /l̥a/,

Sub-joined letters

The subscript position under a radical can only be occupied by the consonants /ja/, /ra/, /la/, and /wa/. In this position they are described as (Wylie: btags, IPA: /taʔ/), in Tibetan meaning "hung on/affixed/appended", for example (IPA: /pʰa.ja.taʔ.t͡ʃʰa/), except for , which is simply read as it usually is and has no effect on the pronunciation of the consonant to which it is subjoined, for example (IPA: /ka.wa.suː.ka/).

Vowel marks

The vowels used in the alphabet are /a/, /i/, /u/, /e/, and /o/. While the vowel /a/ is included in each consonant, the other vowels are indicated by marks; thus /ka/, /ki/, /ku/, /ke/, /ko/. The vowels /i/, /e/, and /o/ are placed above consonants as diacritics, while the vowel /u/ is placed underneath consonants.

Old Tibetan included a reversed form of the mark for /i/, the gigu 'verso', of uncertain meaning. There is no distinction between long and short vowels in written Tibetan, except in loanwords (especially those borrowed from Sanskrit).

Extended use

) written in Tibetan script. From the personal artifact collection of Donald Weir. The Tibetan alphabet, when used to write other languages such as Balti, Chinese and Sanskrit, often has additional and/or modified graphemes taken from the basic Tibetan alphabet to represent different sounds.

Extended alphabet

It is a classical rule to transliterate Sanskrit , , and as Tibetan ( ), ( ), ( ) and ( ), respectively, rather than ( ), ( ), ( ) and ( ). Five of the Sanskrit retroflex consonants, ( ), ( ), ( ), ( ) and ( ), are represented by reversed forms of their non-retroflex counterparts, ( ), ( ), ( ), ( ) and ( ).

One further retroflex, ( ), is formed by subjoining retroflex ( ) with ( ), matching the way its non-retroflex counterpart, ( ), is formed from ( ) subjoined with ( ).

Tibetan

keyboard layout The first version of Microsoft Windows to support the Tibetan keyboard layout is MS Windows Vista. The layout has been available in Linux since September 2007. In Ubuntu 12.04, one can install Tibetan language support through Dash / Language Support / Install/Remove Languages, the input method can be turned on from Dash / Keyboard Layout, adding Tibetan keyboard layout.

The layout applies the similar layout as in Microsoft Windows. Mac OS X introduced Tibetan Unicode support in version 10.5, now with three different keyboard layouts available: Tibetan-Wylie, Tibetan QWERTY and Tibetan-Otani.

Dzongkha

keyboard layout The Dzongkha keyboard layout scheme is designed as a simple means for inputting Dzongkha text on computers. This keyboard layout was standardized by the Dzongkha Development Commission (DDC) and the Department of Information Technology (DIT) of the Royal Government of Bhutan in 2000.

It was updated in 2009 to accommodate additional characters added to the Unicode and ISO 10646 standards since the initial version. Since the arrangement of keys essentially follows the usual order of the Dzongka and Tibetan alphabet, the layout can be quickly learned by anyone familiar with this alphabet. Subjoined (combining) consonants are entered using the Shift key.

The Dzongka keyboard layout is included in Microsoft Windows, Android, and most distributions of Linux as part of XFree86.

Unicode

Tibetan was originally one of the scripts in the first version of the Unicode Standard in 1991, in the Unicode block U+1000–U+104F. However, in 1993, in version 1.1, it was removed (the code points it took up would later be used for the Burmese script in version 3.0). The Tibetan script was re-added in July, 1996 with the release of version 2.0.

The Unicode block for Tibetan is U+0F00–U+0FFF. It includes letters, digits and various punctuation marks and special symbols used in religious texts: File:Tibetan Varnamala (Uchen).png|Tibetan Choksat (Alphabet) in Uchen style File:Tibetan Varnamala (chuyig).png|Tibetan Choksat (Alphabet) in Chugyig cursive style File:Tibetan Varnamala (Betsu).png|Tibetan Choksat (Alphabet) in Bêtsug cursive style File:Tibetan Varnamala (Drutsa).png|Tibetan Choksat (Alphabet) in Drutsa cursive style File:Tibetan Varnamala (Tsumachu).png|Tibetan Choksat (Alphabet) in Tsugma-chu cursive style File:Tibetan Varnamala (Tsuring).png|Tibetan Choksat (Alphabet) in Tsugring cursive style File:Tibetan Varnamala (Tsutong).png|Tibetan Choksat (Alphabet) in Tsugtung cursive style

Tibetan Calligraphy —Online guide for writing Tibetan script. Elements of the Tibetan writing system. Unicode area U0F00-U0FFF, Tibetan script (162KB) Encoding Model of the Tibetan Script in the UCS Digital Tibetan —Online resource for the digitalization of Tibetan.

Tibetan Scripts, Fonts & Related Issues—THDL articles on Unicode font issues; free cross-platform OpenType fonts—Unicode compatible. Free Tibetan Fonts Project Ancient Scripts: Tibetan

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374011349 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.