Timber hitch

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The timber hitch is a knot used to attach a single length of rope to a cylindrical object. Secure while tension is maintained, it is easily untied even after heavy loading. The timber hitch is a very old knot. It is first known to have been mentioned in a nautical source c. 1625 and illustrated in 1762.

The timber hitch is a knot used to attach a single length of rope to a cylindrical object. Secure while tension is maintained, it is easily untied even after heavy loading. The timber hitch is a very old knot. It is first known to have been mentioned in a nautical source c. 1625 and illustrated in 1762.

Usage

As the name suggests, this knot is often used by lumbermen and arborists for attaching ropes or chains to tree trunks, branches, and logs. For stability when towing or lowering long items, the addition of a half-hitch in front of the timber hitch creates a timber hitch and a half hitch, or known as a killick hitch when at sea.

A killick is "a small anchor or weight for mooring a boat, sometimes consisting of a stone secured by pieces of wood". This can also prevent the timber hitch from rolling. The timber hitch is one of the few knots that can easily be tied in a chain, leading to its use in applications where ropes lack the necessary strength and would break under the same amount of tension.

This knot is also known as the Bowyer's Knot, as it is used to attach the lower end of the bowstring to the bottom limb on an English longbow. The hitch is also one of the methods used to connect ukulele and classical guitar strings to the bridge of the instruments. File:Zimmermannsknoten.jpg|Timber hitch on a tree trunk.

File:Classical_Guitar_Bridge_Bone.jpg|Timber hitches on the bridge of a classical guitar

Tying

To make the knot, pass the rope completely around the object. Pass the running end around the standing part, then through the loop just formed. Make three or more turns (or twists) around the working part.

Pull on the standing part to tighten around the object. A common error in tying can be avoided by assuring that the turns are made in the working part around itself. When making the hitch in laid rope, the turns should be made with the lay of the rope, that is, in the same direction as the twist of the rope.

File:Timber Hitch HowTo.jpg|Timber hitch step by step. Three turns are shown. File:Corde_chitarra_classica.jpg|Tying technique for stringed instruments

Security

Although The Ashley Book of Knots states that "three tucks or turns are ample", this work was written prior to the wide use of synthetic fiber cordage. Later sources suggest five or more turns may be required for full security in modern synthetic ropes.

See also

List of knots Killick hitch

https://knots.neocities.org/timberhitch

Text derived from https://en.wikipedia.org/w/index.php?oldid=1362379098 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.