Lesson plan
Time Protocol
The Time Protocol is a network protocol in the Internet Protocol Suite. Its purpose is to provide a site-independent, machine readable date and time. The Time Protocol may be implemented over the Transmission Control Protocol (TCP) or the User Datagram Protocol (UDP). A host connects to a server that supports the Time Protocol on port 37. The server then sends the time as a 32-bit unsigned integer in binary format and in network byte order, representing the number of seconds since 00:00 (midnight) 1 January 1900 GMT, and closes the connection. Operation over UDP requires the sending of any datagram to the server port, as there is no connection setup for UDP. The fixed 32-bit data format means that the timestamp rolls over approximately every 136 years, with the first such occurrence on . Programs that use the Time Protocol must be carefully designed to use context-dependent information to distinguish these dates from those in 1900. Many Unix-like operating systems used the Time Protocol to monitor or synchronize their clocks using the rdate utility, but this function was superseded by the Network Time Protocol (NTP) and the corresponding ntpdate utility. NTP is more sophisticated in various ways, among them that its resolution is finer than one second.
Article summary
The Time Protocol is a network protocol in the Internet Protocol Suite. Its purpose is to provide a site-independent, machine readable date and time. The Time Protocol may be implemented over the Transmission Control Protocol (TCP) or the User Datagram Protocol (UDP). A host connects to a server that supports the Time Protocol on port 37. The server then sends the time as a 32-bit unsigned integer in binary format and in network byte order, representing the number of seconds since 00:00 (midnight) 1 January 1900 GMT, and closes the connection. Operation over UDP requires the sending of any datagram to the server port, as there is no connection setup for UDP. The fixed 32-bit data format means that the timestamp rolls over approximately every 136 years, with the first such occurrence on . Programs that use the Time Protocol must be carefully designed to use context-dependent information to distinguish these dates from those in 1900. Many Unix-like operating systems used the Time Protocol to monitor or synchronize their clocks using the rdate utility, but this function was superseded by the Network Time Protocol (NTP) and the corresponding ntpdate utility. NTP is more sophisticated in various ways, among them that its resolution is finer than one second.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.