Lesson plan
Timing mark
. A timing mark is an indicator used for setting the timing of the ignition system of an engine, typically found on the crankshaft pulley (as pictured) or the flywheel. These have the largest radius rotating at crankshaft speed and therefore are the place where marks at one degree intervals will be furthest apart. On older engines, it is common to set the ignition timing using a timing light, which flashes in time with the ignition system (and hence engine rotation). Shining the light on the timing marks makes them appear stationary due to the stroboscopic effect. The ignition timing can then be adjusted to fire at the correct point in the engine's rotation, typically a few degrees before top dead centre and advancing with increasing engine speed. The timing can be adjusted by loosening and slightly rotating the distributor in its seat. Modern engines often use a crank sensor directly connected to the engine management system. The term can also be used to describe the tick marks along the length of an optical mark recognition sheet in order to confirm the location of the sheet as it passes through the reader. See, for example, U.S. Patent 3,218,439 (filed 1964, granted 1965), which refers to a timing track down the left side of the form, and U.S. Patent 3,267,258 (filed 1963, granted 1966), which refers to a column of timing marks on the right side of the form.…
Article summary
. A timing mark is an indicator used for setting the timing of the ignition system of an engine, typically found on the crankshaft pulley (as pictured) or the flywheel. These have the largest radius rotating at crankshaft speed and therefore are the place where marks at one degree intervals will be furthest apart. On older engines, it is common to set the ignition timing using a timing light, which flashes in time with the ignition system (and hence engine rotation). Shining the light on the timing marks makes them appear stationary due to the stroboscopic effect. The ignition timing can then be adjusted to fire at the correct point in the engine's rotation, typically a few degrees before top dead centre and advancing with increasing engine speed. The timing can be adjusted by loosening and slightly rotating the distributor in its seat. Modern engines often use a crank sensor directly connected to the engine management system. The term can also be used to describe the tick marks along the length of an optical mark recognition sheet in order to confirm the location of the sheet as it passes through the reader. See, for example, U.S. Patent 3,218,439 (filed 1964, granted 1965), which refers to a timing track down the left side of the form, and U.S. Patent 3,267,258 (filed 1963, granted 1966), which refers to a column of timing marks on the right side of the form.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.