Timothy Hackworth

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Timothy Hackworth (22 December 1786 – 7 July 1850) was an English steam locomotive engineer who lived in Shildon, County Durham, England and was the first locomotive superintendent of the Stockton and Darlington Railway.

Timothy Hackworth (22 December 1786 – 7 July 1850) was an English steam locomotive engineer who lived in Shildon, County Durham, England and was the first locomotive superintendent of the Stockton and Darlington Railway.

The and blastpipe development

In 1824, Hackworth occupied a temporary position as a "borrowed man" or relief manager at the Forth Street factory of Robert Stephenson and Company, whilst Robert was away in South America and George was occupied with the surveying of new railways, notably the Liverpool and Manchester Railway. Hackworth only stayed until the end of that year, following which he returned to Walbottle occupying his time with contract work until, upon the recommendation of George Stephenson, he was appointed on 13 May 1825 to the position of locomotive superintendent of the Stockton and Darlington Railway, a post he held until May 1840.

Hackworth is believed to have been influential in developing the first Stephenson locomotive for the Stockton and Darlington Railway during his time at the Forth Street factory. That locomotive, then named Active and now known as Locomotion No. 1, was delivered to the railway just before the opening ceremony on 27 September 1825.

Three more of the same type (Hope, Black Diamond, Diligence) were delivered in the following months and severe operational difficulties made steam locomotives unappealing, thus Hackworth developed an improved design to negate this. This resulted in the Royal George of 1827, an early 0-6-0 locomotive that among many new features incorporated a correctly aligned steam blastpipe.

Hackworth is usually acknowledged as the inventor of this concept. From 1830 onwards the blastpipe was employed by the Stephensons for their updated Rocket and all subsequent new locomotives. Recent letters acquired by the National Railway Museum would appear to confirm Hackworth as the inventor of the device.

Since Trevithick's time, it had been common to direct exhaust steam from the cylinders through the chimney using "eductor pipes" for convenience and noise reduction, and its effect on the fire was noted. Regardless, Hackworth was likely the first engineer to fully account for the blast's role in automatically realising the "perfect equilibrium between steam production and usage" in a firetube boiler and consider the blastpipe a distinct device, focusing on its proportions, nozzle size, positioning and precise alignment.

Sans Pareil and the Rainhill trials

In 1829 the Liverpool and Manchester Railway, the world's first "Inter-City" railway, was under construction. There was a large potential for both passenger and goods traffic. However all locomotives built to date, including those for the Stockton and Darlington, had been intended for slow freight, with any passenger service handled by single horse-drawn coaches.

It was clear that any future locomotives would have to be more versatile. Matters were further complicated by the news of the problems encountered on the S&D, which led to considerable debate over the ideal motive power.

George Stephenson, the line's civil engineer, was firmly in favour of steam traction and asked for a report from Hackworth, who confirmed the locomotives' difficulties while working to resolve them. To settle the debate the directors set up a competition to be held at Rainhill, resulting in three serious contestants.

Hackworth, with his very limited resources, entered the 0-4-0 locomotive Sans Pareil. It was officially deemed overweight, but was ultimately allowed to compete. A faulty cylinder casting led to steam leaks and premature withdrawal.

Stephenson's Rocket was the winner as the only locomotive that stayed the course whilst fully complying with the rules. In the event, none of the contestants fully answered the railway's requirements. Hackworth stayed on after the event, repairing Sans Pareil and showed that it was a capable machine.

After this the L&M management purchased the locomotive, subsequently reselling it at a loss to the Bolton and Leigh Railway where it worked until 1844. As Ahrons notes, the vertical cylinders would have given considerable hammer blow at speed and made it unsuited for passenger service on the track in the long term.

Nevertheless it performed very capably, largely due to the carefully designed and tuned blastpipe.

Later productions

In addition to working on the Stockton and Darlington, Hackworth set up his own business in which his son, John Wesley Hackworth, fully participated. This business produced a variety of machinery; notably, he built the first locomotive to run in Russia for the Tsarskoye Selo Railway at Shildon in 1836, of which his son was responsible for the safe delivery and preliminary trials.

In 1838, the Samson was built for the Albion Mines Railway in Nova Scotia and was one of the first engines to run in Canada. , preserved at the Nova Scotia Museum of Industry One of his 1833 apprentices, Daniel Adamson, would further developed his boiler designs and become a successful manufacturer, influencing the inception of the Manchester Ship Canal. Hackworth's last new locomotive design was the 2-2-2 Sans Pareil II, a "demonstrator" of 1849.

This locomotive was a development of the Jenny Lind type with driving wheels, of heating surface and a partially-welded boiler. It performed very well in terms of fuel efficiency and load-hauling performance. Hackworth was so satisfied that he issued a public challenge to Robert Stephenson to test it against his latest York, Newcastle and Berwick Railway locomotive, No. 190.

Nothing resulted from this and Hackworth died the following year.

Family

Hackworth had three sons and six daughters. His eldest son, John Wesley Hackworth (1820–1891), carried on the business after the death of his father. J. W. Hackworth patented the Hackworth valve gear in 1859.

See also

1786 in rail transport Locomotives of the Stockton and Darlington Railway

References

CONTROVERSIAL STEPHENSON LETTER DONATED TO NATIONAL RAILWAY MUSEUM North East History: The Stockton and Darlington Railway

Timothy Hackworth: Rail Pioneer Timothy Hackworth Sir Goldsworthy Gurney (1793–1875) chapter VIII, Stephenson's Engine, in William H. Brown, The History of the First Locomotives in America. From Original Documents and the Testimony of Living Witnesses, 1871 Hackworth Family Archive

Text derived from https://en.wikipedia.org/w/index.php?oldid=1341168099 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.