Titanium aluminide

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Titanium aluminide (chemical formula AlTi), commonly gamma titanium, is an intermetallic chemical compound. It is lightweight and resistant to oxidation and heat, but has low ductility. The density of γ-TiAl is about .

It finds use in several applications including aircraft, jet engines, sporting equipment, and automobiles. The development of TiAl based alloys began circa 1970. The alloys have been used in these applications only since about 2000.

Titanium aluminide has three major intermetallic compounds: gamma titanium aluminide (gamma TiAl, γ-TiAl), alpha 2- and . Among the three, gamma TiAl has received the most interest and applications.

Titanium aluminide (chemical formula AlTi), commonly gamma titanium, is an intermetallic chemical compound. It is lightweight and resistant to oxidation and heat, but has low ductility. The density of γ-TiAl is about .

It finds use in several applications including aircraft, jet engines, sporting equipment, and automobiles. The development of TiAl based alloys began circa 1970. The alloys have been used in these applications only since about 2000.

Titanium aluminide has three major intermetallic compounds: gamma titanium aluminide (gamma TiAl, γ-TiAl), alpha 2- and . Among the three, gamma TiAl has received the most interest and applications.

Applications of gamma-TiAl

Gamma TiAl has excellent mechanical properties and oxidation and corrosion resistance at elevated temperatures (over ), which makes it a possible replacement for traditional Ni based superalloy components in aircraft turbine engines. TiAl-based alloys have potential to increase the thrust-to-weight ratio in aircraft engines.

This is especially the case with the engine's low-pressure turbine blades and the high-pressure compressor blades. These are traditionally made of Ni-based superalloy, which is nearly twice as dense as TiAl-based alloys. Some gamma titanium aluminide alloys retain strength and oxidation resistance to , which is higher than the operating temperature limit of conventional titanium alloys.

General Electric uses gamma TiAl for the low-pressure turbine blades on its GEnx engine, which powers the Boeing 787 and Boeing 747-8 aircraft. This was the first large-scale use of this material on a commercial jet engine when it entered service in 2011.

The TiAl LPT blades are cast by Precision Castparts Corp. and Avio s.p.a. Machining of the Stage 6, and Stage 7 LPT blades is performed by Moeller Manufacturing. An alternate pathway for production of the gamma TiAl blades for the GEnx and GE9x engines using additive manufacturing is being explored.

has the lowest density of , the highest micro hardness of and the best oxidation resistance even at . However, the applications of in the engineering and aerospace fields are limited by its poor ductility.

In addition, the loss of ductility at ambient temperature is usually accompanied by a change of fracture mode from ductile transgranular to brittle intergranular or to brittle cleavage. Despite the fact that , machining quality is still a difficult problem to tackle. Near-net shape manufacturing technology is considered as one of the best choices for preparing such materials.

Machining Gamma Titanium Aluminide Components - Moeller Manufacturing Titanium Aluminide Applications in the HighSpeed Civil Transport Titanium Aluminides - Intermetallics on azom.com. Power House (GEnx TiAl LPT Blade Announcement)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370816025 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.