Titanium Explorer

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Titanium Explorer is an Australian autogyro designed by Neil Sheather and Andrew Pepper and produced by Titanium Auto Gyro (TAG Aviation Pty Limited) of Attunga, New South Wales. The aircraft is supplied complete and ready-to-fly, although development of a kit for amateur construction was underway in 2015.

The Titanium Explorer is an Australian autogyro designed by Neil Sheather and Andrew Pepper and produced by Titanium Auto Gyro (TAG Aviation Pty Limited) of Attunga, New South Wales. The aircraft is supplied complete and ready-to-fly, although development of a kit for amateur construction was underway in 2015.

Design and development

Development of the design was started in 2009 as a result of noted deficiencies in imported autogyro designs for Australian conditions. The Explorer features a single main rotor, a two-seats-in tandem open cockpit, each with a windshield, tricycle landing gear with wheel pants, plus a tail caster and a four-cylinder, liquid and air-cooled, four stroke Rotax 912 or turbocharged Rotax 914 engine in pusher configuration.

The aircraft fuselage box-section frame is made from titanium, while the cockpit fairing is made from carbon fiber reinforced polymer and fibreglass composites. Its two-bladed rotor has a diameter of and a chord of . The design is noted for its rugged suspension, designed for Australian outback conditions.

The aircraft has a typical empty weight of and a gross weight of , giving a useful load of . With full fuel of the payload for the pilot, passenger and baggage is .

See also

List of rotorcraft

Text derived from https://en.wikipedia.org/w/index.php?oldid=1321162627 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.