TL431

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The TL431 integrated circuit (IC) is a three-terminal adjustable precise shunt voltage regulator. With the use of an external voltage divider, a TL431 can regulate voltages ranging from 2.495 to 36 V, at currents up 100 mA. The typical initial deviation of reference voltage from the nominal 2.495 V level is measured in millivolts, the maximum worst-case deviation is measured in tens of millivolts. The circuit can control power transistors directly; combinations of the TL431 with power MOS transistors are used in high efficiency, very low dropout linear regulators. The TL431 is the de facto industry standard error amplifier circuit for switched-mode power supplies with optoelectronic coupling of the input and output networks. Texas Instruments introduced the TL431 in 1977. In the 21st century, the original TL431 remains in production along with a multitude of clones and derivatives (TLV431, TL432, ATL431, KA431, LM431, TS431, 142ЕН19 and others). These functionally similar circuits may differ considerably in die size and layout, precision and speed characteristics, minimal operating currents, safe operating areas, and specific voltage reference.

The TL431 integrated circuit (IC) is a three-terminal adjustable precise shunt voltage regulator. With the use of an external voltage divider, a TL431 can regulate voltages ranging from 2.495 to 36 V, at currents up 100 mA. The typical initial deviation of reference voltage from the nominal 2.495 V level is measured in millivolts, the maximum worst-case deviation is measured in tens of millivolts. The circuit can control power transistors directly; combinations of the TL431 with power MOS transistors are used in high efficiency, very low dropout linear regulators. The TL431 is the de facto industry standard error amplifier circuit for switched-mode power supplies with optoelectronic coupling of the input and output networks. Texas Instruments introduced the TL431 in 1977. In the 21st century, the original TL431 remains in production along with a multitude of clones and derivatives (TLV431, TL432, ATL431, KA431, LM431, TS431, 142ЕН19 and others). These functionally similar circuits may differ considerably in die size and layout, precision and speed characteristics, minimal operating currents, safe operating areas, and specific voltage reference. voltages specified for steady-state regulation at V CA =7 V The TL431 is functionally equivalent to an ideal npn bipolar transistor switch with a stable 2.495 V switching threshold and no apparent hysteresis. "Base", "collector" and "emitter" of this "transistor" are traditionally called reference (R or REF), cathode (C) and anode (A). The positive control voltage, V REF , is applied between reference input and the anode; the output current, I CA , flows from the cathode to the anode. On a functional level the TL431 contains an open-loop operational amplifier that compares the input control voltage with a 2.495 V voltage reference. This, however, is merely an abstraction: both functions are inextricably linked inside the TL431's front end. There is no physical 2.495 V source: the actual internal reference is provided by a 1.2 V Widlar bandgap (transistors T3, T4, T5), driven by the input emitter followers T1, T6. This enables correct operation even when the cathode-anode voltage drops below 2.495 V, down to around 2.0 V minimum. The differential amplifier is made of two current sources (T8, T9); the positive difference of their currents sinks into the base of T10. The output open collector transistor, T11, can sink currents up to 100 mA, and is protected from polarity reversal with a reverse diode. The circuit does not provide protection against excessive current or overheating. The nominal reference voltage, V REF =2.495 V, stated in a datasheet, is tested in zener mode at an ambient temperature of + , and I CA =10 mA. The threshold voltage and the boundary between low-transconductance and high-transconductance modes are not specified and not tested. The actual V REF maintained by a specific TL431 in a real-world application may be higher or lower than 2.495 V, depending on four factors: Individual initial deviation of a specific chip. For different grades of the TL431, deviation at normal conditions is within ±0.5%, ±1%, or ±2%; Temperature. Thermal plot of a bandgap reference voltage has a hump-like shape. By design, the hump is centered on + , where V REF =2.495 V; above and below + , V REF gently decreases by a few millivolts. However, if a specific IC deviates substantially from the norm, the hump shifts to lower or higher temperatures; in the worst outliers it degenerates into a monotonously rising or falling curve. Owing to finite output impedance, changes in V CA voltage affect I CA and, indirectly, V REF , just like they do in transistors or triodes. For a given fixed I CA , a 1 V rise in V CA must be offset with ≈1.4 mV (2.7 mV worst-case maximum) decrease in V REF . The ratio μ = 1 V / 1.4 mV ≈ 300–1000, or ≈ 50–60 dB is the theoretical maximum open-loop voltage gain at DC and low frequencies; Owing to finite transconductance, a rise in I CA causes a rise in V REF at a rate of 0.5–1 mV/mA.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1369507837 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.