top cap

Uses your system voice; voice and rate in settings.

Q7824654Snapshot

≈ 3 min read

Names in other languages

  • Русскийанодный колпачок
  • Englishtop cap

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

with grid 4 on the top cap In vacuum tube technology, a top cap is a terminal at the top of the tube envelope that connects one of the electrodes, the other electrodes being connected via the tube socket. Top caps have most commonly been used for: * Amplifier or similar tube control grid connection, to provide greater circuit stability by isolating the low-signal circuit from the rest of the tube connections. * Anode connection, to isolate the high-tension circuit, allowing higher voltages to be used. * Physical convenience.

Grid top caps on frequency converters could be connected directly to an adjacent coil; Anode top caps on output tubes could be connected by flying leads directly to an output transformer. Shorter leads generally mean greater stability. A few amplifier tubes used two top caps, symmetrically placed, one for anode and the other for grid.

In audio amplifier tube application, the top cap was originally used for the grid connection, and a serviceman could apply a moist finger to the terminal to confirm that the stage and subsequent circuits were working by listening for the hum this produced in the loudspeaker. This practice led to accidents when anode top caps were first introduced to amplifier stages (they had been used on rectifiers for some time).

with grid 4 on the top cap In vacuum tube technology, a top cap is a terminal at the top of the tube envelope that connects one of the electrodes, the other electrodes being connected via the tube socket. Top caps have most commonly been used for: Amplifier or similar tube control grid connection, to provide greater circuit stability by isolating the low-signal circuit from the rest of the tube connections. Anode connection, to isolate the high-tension circuit, allowing higher voltages to be used. Physical convenience.

Grid top caps on frequency converters could be connected directly to an adjacent coil; Anode top caps on output tubes could be connected by flying leads directly to an output transformer. Shorter leads generally mean greater stability. A few amplifier tubes used two top caps, symmetrically placed, one for anode and the other for grid.

In audio amplifier tube application, the top cap was originally used for the grid connection, and a serviceman could apply a moist finger to the terminal to confirm that the stage and subsequent circuits were working by listening for the hum this produced in the loudspeaker. This practice led to accidents when anode top caps were first introduced to amplifier stages (they had been used on rectifiers for some time).

Text derived from https://en.wikipedia.org/w/index.php?oldid=1324987214 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot top-cap-880137-8cdef29ff879d38b · hash 8cdef29ff879d38b962b56519e68abb002a782a6e7715ba95fb6f4d37677f0da · captured 1764516336.0 · version history

Cite this page as: encyclopegia.org, “top cap”, snapshot top-cap-880137-8cdef29ff879d38b. https://encyclopegia.org/a/top-cap

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.