Lesson plan

Top kill

A top kill is a procedure used as a means of regaining control over an oil well that is producing crude petroleum or natural gas at a rate that is becoming difficult to govern, and/or is anticipated to become uncontrollable without intervention. This procedure is not used when control has been completely lost over the well, such as in a blowout. The process involves pumping heavyweight drilling mud or drilling fluid downwards into the well. This procedure is expected to stop the flow of oil and gas from the well by neutralizing the pressure differential between the source and the top of the well. A further step could be sealing the well completely, often with cement.

Back to article

Article summary

A top kill is a procedure used as a means of regaining control over an oil well that is producing crude petroleum or natural gas at a rate that is becoming difficult to govern, and/or is anticipated to become uncontrollable without intervention. This procedure is not used when control has been completely lost over the well, such as in a blowout. The process involves pumping heavyweight drilling mud or drilling fluid downwards into the well. This procedure is expected to stop the flow of oil and gas from the well by neutralizing the pressure differential between the source and the top of the well. A further step could be sealing the well completely, often with cement.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.