Lesson plan

Topor

TopoR (Topological Router) is an EDA program developed and maintained by the Russian company Eremex. It is dedicated to laying out a printed circuit board (PCB). The current version is 6.3.17875 as of 2017-09-20. It features an autorouter and a set of tools intended to reduce the amount of effort needed for manual routing of a PCB. A distinctive feature of TopoR is the absence of preferred routing directions.

Back to article

Article summary

TopoR (Topological Router) is an EDA program developed and maintained by the Russian company Eremex. It is dedicated to laying out a printed circuit board (PCB). The current version is 6.3.17875 as of 2017-09-20. It features an autorouter and a set of tools intended to reduce the amount of effort needed for manual routing of a PCB. A distinctive feature of TopoR is the absence of preferred routing directions.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.