Lesson plan

Torque ripple

Torque ripple is an effect seen in rotating electrical machines, referring to a oscillation or pulsation of the average output torque as the electrical machines operates under steady states. The combination between the winding distributed in slots as a discrete magnetomotive-force source (electric loading) and the rotation-dependent magnetic reluctance (including the magnetic saturation, rotor and stator reluctances) is the main reason of the torque ripple. It is usual to evaluate the torque ripple as the difference in maximum and minimum torque over one complete revolution from measurements or calculations, generally expressed as a percentage per operating point (specific speed and mean torque). Due to the torque ripple, the speed of the shaft will oscillate as well, as the entire mechanical load on the test bench will expose the oscillations of mechanical and electrical power.

Back to article

Article summary

Torque ripple is an effect seen in rotating electrical machines, referring to a oscillation or pulsation of the average output torque as the electrical machines operates under steady states. The combination between the winding distributed in slots as a discrete magnetomotive-force source (electric loading) and the rotation-dependent magnetic reluctance (including the magnetic saturation, rotor and stator reluctances) is the main reason of the torque ripple. It is usual to evaluate the torque ripple as the difference in maximum and minimum torque over one complete revolution from measurements or calculations, generally expressed as a percentage per operating point (specific speed and mean torque). Due to the torque ripple, the speed of the shaft will oscillate as well, as the entire mechanical load on the test bench will expose the oscillations of mechanical and electrical power.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.