Torsion box

A torsion box consists of two thin layers of material (skins) on either side of a lightweight core, usually a grid of beams.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A torsion box consists of two thin layers of material (skins) on either side of a lightweight core, usually a grid of beams. It is designed to resist torsion under an applied load. A hollow core door is probably the most common example of a torsion box (stressed skin) structure.

The principle is to use less material more efficiently. The torsion box uses the properties of its thin surfaces to carry the imposed loads primarily through tension while the close proximity of the enclosed core material compensates for the tendency of the opposite side to buckle under compression.

Torsion boxes are used in the construction of structural insulated panels for houses, wooden tables and doors, skis, snowboards, and airframes - especially wings and vertical stabilizers.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1365341755 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.