Lesson plan

Total external reflection

Total external reflection is a phenomenon traditionally involving X-rays and extreme ultraviolet, but in principle any type of electromagnetic or other wave, closely related to total internal reflection. Total internal reflection describes the fact that radiation (e.g. visible light) can, at certain angles, be totally reflected from an interface between two media of different indices of refraction (see Snell's law). Total internal reflection occurs when the first medium is optically denser than the second medium, and the incident angle is larger than the critical angle of the medium, for example, light that starts in water and bounces off the water-to-air interface. Total external reflection is the situation where the light starts in air or vacuum (refractive index close to or equal to 1), and bounces off a material with index of refraction less than 1. For example, in the X-ray bandpass, the frequency-dependent refractive index is frequently slightly less than 1 for virtually all materials. This is a result of the frequency of the X-ray, \omega , being comparable to, or larger than most atomic binding frequencies in a material.…

Back to article

Article summary

Total external reflection is a phenomenon traditionally involving X-rays and extreme ultraviolet, but in principle any type of electromagnetic or other wave, closely related to total internal reflection. Total internal reflection describes the fact that radiation (e.g. visible light) can, at certain angles, be totally reflected from an interface between two media of different indices of refraction (see Snell's law). Total internal reflection occurs when the first medium is optically denser than the second medium, and the incident angle is larger than the critical angle of the medium, for example, light that starts in water and bounces off the water-to-air interface. Total external reflection is the situation where the light starts in air or vacuum (refractive index close to or equal to 1), and bounces off a material with index of refraction less than 1. For example, in the X-ray bandpass, the frequency-dependent refractive index is frequently slightly less than 1 for virtually all materials. This is a result of the frequency of the X-ray, \omega , being comparable to, or larger than most atomic binding frequencies in a material.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.