Lesson plan

Total indicator reading

for total run-out In metrology and the fields that it serves (such as manufacturing, machining, and engineering), total indicator reading (TIR), also known by the newer name full indicator movement (FIM), is the difference between the maximum and minimum measurements (the range), that is, readings of an indicator, on the planar, cylindrical, or contoured surface of a part, showing its amount of deviation from flatness, roundness (circularity), cylindricity, concentricity with other cylindrical features, or similar conditions. The indicator traditionally would be a dial indicator; today dial-type and digital indicators coexist. The earliest expansion of "TIR" was total indicated run-out and concerned cylindrical or tapered (conical) parts, where "run-out" (noun) refers to any imperfection of form that causes a rotating part such as a shaft to "run out" (verb), that is, to not rotate with perfect smoothness. These conditions include being out-of-round (that is, lacking sufficient roundness); eccentricity (that is, lacking sufficient concentricity); or being bent axially (regardless of whether the surfaces are perfectly round and concentric at every cross-sectional point).…

Back to article

Article summary

for total run-out In metrology and the fields that it serves (such as manufacturing, machining, and engineering), total indicator reading (TIR), also known by the newer name full indicator movement (FIM), is the difference between the maximum and minimum measurements (the range), that is, readings of an indicator, on the planar, cylindrical, or contoured surface of a part, showing its amount of deviation from flatness, roundness (circularity), cylindricity, concentricity with other cylindrical features, or similar conditions. The indicator traditionally would be a dial indicator; today dial-type and digital indicators coexist. The earliest expansion of "TIR" was total indicated run-out and concerned cylindrical or tapered (conical) parts, where "run-out" (noun) refers to any imperfection of form that causes a rotating part such as a shaft to "run out" (verb), that is, to not rotate with perfect smoothness. These conditions include being out-of-round (that is, lacking sufficient roundness); eccentricity (that is, lacking sufficient concentricity); or being bent axially (regardless of whether the surfaces are perfectly round and concentric at every cross-sectional point).…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.