Toyota A engine

The Toyota A Series engines are a family of inline-four internal combustion engines with displacement from 1.3 L to 1.8 L produced by Toyota Motor Corporation.

Uses your system voice; voice and rate in settings.

≈ 26 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Toyota A Series engines are a family of inline-four internal combustion engines with displacement from 1.3 L to 1.8 L produced by Toyota Motor Corporation. The series has cast iron engine blocks and aluminum cylinder heads. To make the engine as short as possible, the cylinders are siamesed.

The development of the series began in the late 1970s, when Toyota wanted to develop a completely new engine for the Toyota Tercel, the successor of Toyota's K engine. The goal was to achieve good fuel efficiency and performance as well as low emissions with a modern design.

The A-series includes one of the first Japanese mass-production DOHC, four-valve-per-cylinder engines, the 4A-GE, and a later version of the same engine was one of the first production five-valve-per-cylinder engines. Toyota joint venture partner Tianjin FAW Xiali produces the 1.3 L 8A and resumed production of the 5A in 2007.

The Toyota A Series engines are a family of inline-four internal combustion engines with displacement from 1.3 L to 1.8 L produced by Toyota Motor Corporation. The series has cast iron engine blocks and aluminum cylinder heads. To make the engine as short as possible, the cylinders are siamesed.

The development of the series began in the late 1970s, when Toyota wanted to develop a completely new engine for the Toyota Tercel, the successor of Toyota's K engine. The goal was to achieve good fuel efficiency and performance as well as low emissions with a modern design.

The A-series includes one of the first Japanese mass-production DOHC, four-valve-per-cylinder engines, the 4A-GE, and a later version of the same engine was one of the first production five-valve-per-cylinder engines. Toyota joint venture partner Tianjin FAW Xiali produces the 1.3 L 8A and resumed production of the 5A in 2007.

1A

The 1.5 L 1A was produced between 1978 and 1980. All variants were belt-driven 8-valve counter-flow SOHC engines with a single, twin-barrel downdraft carburetor. It used Toyota's Turbulence Generating Pot (TGP) lean combustion system to meet Japanese emissions standards at the time with only an oxidation (2-way) catalyst. The 1A engine was only long.

1A-C

Applications: AL10 Tercel

1A-U

Using Toyota two-way catalyst. Output: at 5,600 rpm and at 3,600 rpm (compression at 9.0:1) Applications: AL10 Tercel/Corsa (Japan only)

2A

The 1.3 L 2A was produced from 1979 through 1989. 2A engines in 1982 onwards AL20 Tercels have a slightly different valve cover and timing belt cover than early AL11 Tercels, as well as an automatic choke, and automatically controlled hot air intake (HAI) system. It also has higher compression ratio, and reformulated combustion chambers to improve the fuel economy and emissions.

All variants used belt-driven SOHC eight-valve counter-flow cylinder heads with a single downdraft carburetor.

2A, 2A-L, 2A-LC

Output: at 6,000 rpm and at 3,800 rpm (compression at 9.3:1) Applications: AE80 Corolla 1983–1985 (excluding Japan, 2A-LC in Australia) AL11 Tercel 1979–1982 (excluding Japan and North America) AL20 Tercel 1982–1984 (excluding Japan and North America)

2A-U, 2A-LU

Using Toyota TTC-C catalytic converter. Output: at 6,000 rpm and at 3,600 rpm (compression at 9.3:1) Applications: AE80 Corolla 1983–1985 (Japan only) AL20 Corolla II 1982–1986 (Japan only) AL11 Corsa (Japan only) AL20 Corsa 1982–1989 (Japan only) AE80 Sprinter 1983–1985 (Japan only) AL11 Tercel AL20 Tercel 1982–1989 (Japan only)

3A

The 1.5 L 3A was produced from 1979 through 1989. The 3A engine is the successor of Toyota's first A engine, the 1A. All variants were belt-driven eight-valve counter-flow SOHC engines but no longer used Toyota's "Turbulence Generating Pot" pre-combustion system from the 1A.

3A, 3A-C

Output: at 5,600 rpm and at 3,800 rpm (compression at 9.0:1, European spec) at 4,500 rpm (N. America, AL-21 3 door liftback) at 4,800 rpm (N. America, AL-25 5-door wagon) Applications: AL12 Tercel 1979–1982 (excluding Japan) AL21/25 Tercel 1982–1988 (excluding Japan)

3A-U, 3A-LU

Using Toyota TTC-C catalytic converter. On some models marked as 3A-II.

Output: at 5,600 rpm and at 3,600 rpm (compression at 9.0:1) Applications: AA60 Carina 1981–1987 (Japan only) AT150 Carina 1984–1988 (Japan only) AE70 Corolla 1979–1983 (Japan only) AE81/85 Corolla 1983–1987 (Japan only) AL21 Corolla II 1982–1986 (Japan only) AT140 Corona 1982–1987 (Japan only) AT150 Corona 1983–1987 (Japan only) AL12 Corsa (Japan only) AL21/25 Corsa 1982–1989 (Japan only) AW10 MR2 1984–1989 (Japan only) AE70 Sprinter 1979–1983 (Japan only) AE81/85 Sprinter 1983–1987 (Japan only) AL25 Sprinter Carib 1982–1988 (Japan only) AL21/25 Tercel 1982–1989 (Japan only)

3A-HU

High compression version with Toyota TTC-C catalytic converter. Output: at 6,000 rpm and at 4,000 rpm (compression at 9.3:1) Applications: AL21 Corolla II 1982–1984 (Japan only) AL21 Corsa 1982–1984 (Japan only) AL21 Tercel 1982–1984 (Japan only)

3A-SU

Twin carburetted swirl-intake version with Toyota TTC-C catalytic converter, introduced in August 1984 along with a facelift for the Tercel (and its sister variants) in Japan. Features two variable-venturi carburetors, which Toyota wanted to test in Japan before launching them in export along E series engine, albeit in single carburetted version.

Because of the swirl-intake, the sealing surface between cylinder head and valve cover is different from other SOHC A-engines, featuring vertical curves on the manifold side of the head. Thus, those parts are not interchangeable between each other.

The swirl was supposed to improve burning of the air-fuel mixture, thus enabling cleaner emissions, improving fuel economy, and increasing power. Output: at 6,000 rpm (compression at 9.3:1) Applications: AL21 Corolla II 1984–1986 (Japan only) AL21/25 Corsa 1984–1989 (Japan only) AL25 Sprinter Carib 1984–1988 (Japan only) AL21/25 Tercel 1984–1989 (Japan only)

4A

The 4A was produced from 1980 through 2002. All 4A engines have a displacement of . The cylinder bore was enlarged from the previous 3A engines at , but the stroke remained the same as the 3A at , giving it an over-square bore/stroke ratio which favours high engine speeds.

Numerous variations of the 4A design were produced, from basic SOHC 8-valve all the way to DOHC 20-valve versions. The power output also varied greatly between versions, from at 4,800 rpm in the basic California-spec 4A-C to at 6,400 rpm in the supercharged 4A-GZE.

4A, 4A-C, 4A-L, 4A-LC

The basic 4A is a SOHC 8 valve carburated engine which produces at 4800 rpm and of torque at 2800 rpm, though the power and torque output figures vary between different regions of the world. in European versions, the combustion chambers were reformulated in early 1986, resulting in an increase of 2 hp, up to at 5600 rpm, along with improvements in fuel economy and emissions. North American market engines: 4A-LC 1.6 L I4, 8-valve SOHC, at 4800 rpm 4A-C 1.6 L I4, 8-valve SOHC, at 5200 rpm European (and other) market engines: (excepting Sweden and Switzerland) 4A-L 1.6 L, I4, 8-valve SOHC, at 5600 rpm, and torque at 4000 rpm (compression at 9.0:1) (Indonesia) 4A-L 1.6 L, I4, 8-valve SOHC, at 5600 rpm, and torque at 3600 rpm (compression at 9.3:1) (Europe) Australian/Swiss/Swedish market engines: Australia, Sweden, and Switzerland shared emissions rules for a period in the 1970s and eighties.

4A-LC 1.6 L, I4, 8-valve SOHC, at 5600 rpm Applications: AT151 Carina II 1983–1987 (Europe only) AT160 Celica 1985–1989 (excluding Japan) AE71 Corolla 1982–1984 (North America, Australia & South Africa only) AE82/86 Corolla 1983–1987 (excluding Japan) AT151 Corona 1983–1987 (excluding Japan) A60 Daihatsu Charmant 1984-1987 (excluding Japan) Elfin Type 3 Clubman Chevrolet Nova (USA NUMMI rebadged Sprinter) 1985-1988

4A-ELU

Fuel injection was added. This increased output to at 5600 rpm and at 4000 rpm. This version is also equipped with Toyota TTC-C catalytic converter. Applications: AT151 Carina 1984–1988 (Japan only) AE82 Corolla 1983–1987 (Japan only) AE82 Sprinter 1983–1987 (Japan only)

4A-F

A narrow-valve (22.3°) DOHC 16-valve carburetor-equipped version, the 4A-F, was produced from 1987 through 1990. Output was at 6,000 rpm and at 3,600 rpm (compression at 9.5:1, EU spec).

This engine featured an aluminum-alloy cylinder head with scissor-gear driven twin overhead camshafts, centered spark plugs, and employed pent-roof combustion chambers which were designed to improve thermal efficiency. It also featured a fully counterweighted crankshaft with five journals and eight balance weights.

The 4A-F was designed to provide more powerful torque in the low-to-mid RPM range as well improving top-end power output. This engine was the first in the series to use Toyota's dual camshaft system known as High-Mecha Twin Cam, where the timing belt drives the exhaust camshaft and the exhaust camshaft then drives the inlet camshaft via scissor gears.

The inlet camshaft acts as a slave camshaft to the exhaust camshaft (the latter acting as a master camshaft for the engine), which led to the system being unofficially known as the "slave-cam system". In contrast, on the 4A-GE engines, both camshafts are driven directly by the timing belts rather than being geared together.

There was a version which featured dual Weber carburetors for Thai market limited edition AE92 Corolla Sporty sedan in 1988, converted by TRD Thailand. It produced at 6,000 rpm and at 4,200 rpm.

Applications: AT171 Carina II 1987–1992 (Europe only) AE92/95 Corolla 1987–1992 (excluding Japan) AE95 Corolla 1988–1989 (Japan only) AE101 Corolla 1992–1998 (Asia, Africa & Latin-America) AE111 Corolla 1997–2001 (Asia, Africa & Latin-America) AT171/177 Corona 1987–1992 (excluding Japan) AE95 Sprinter 1988–1989 (Japan only)

4A-FE

The fuel injected 4A-FE is the successor of the carbureted 4A-F, manufactured from 1987–2001. Toyota designed this engine with fuel economy in mind.

The 4A-FE is basically the same as the 4A-F (introduced in the sixth generation of Corollas), the most apparent difference being the electronic fuel injection system as noted by the 'E'. The engine was succeeded by the 3ZZ-FE, a 1.6-liter engine with VVT-i technology. There are three generations of this engine, which can be identified by the external shape of the engine.

The first generation (1987–1996) featured a plate on the head which read "16 valve EFI" and fuel injectors in the head. The second generation had a higher profile cam design in the head, a cam cover with ribs throughout its length, and fuel injectors in the intake manifold runners.

Mechanically, the late-model engines received MAP load sensing and redesigned pistons, intake ports, and intake manifold. The second generation engine was produced from 1992–1998 (1993–1996 in the US). The third generation (1996–2001) was released exclusively for the Asian market (Japan, Philippines, Pakistan, Thailand, Indonesia, and Malaysia) only.

Although it is very similar to the second generation externally, it only has a slight difference in the top section of the intake manifold and throttle body. This last generation also has a higher additional output of compared to the second generation.

Engine displacement: Layout: DOHC Inline-4 Valves: 16, 4 for each cylinder Redline: 6300 rpm Compression ratio: 9.5:1 Fuel Delivery System: TCCS or MPFI North American market engines: at 5,800 rpm, and torque at 4,800 rpm European market engines: at 6,000 rpm, and torque at 3,200 rpm Asian market engines: at 6,000 rpm Note: power and torque specs for North America and Europe are from the 1988–1992 Corollas. The 4A-FE is different from the 4A-GE in terms of performance and power.

Although both have the same displacement and are DOHC, they were optimized for different uses. The first obvious difference are the valves, the engine's intake and exhaust valves were placed 22.3° apart (compared to 50° in the G-Engines).

The second is that it employed Toyota's High-Mecha Twin Cam system, where both camshafts are geared together with a singular timing belt driving the exhaust camshaft and the exhaust camshaft drives the inlet camshaft via scissor gears (both camshafts on the G-Engine are driven by the timing belts instead). Some of the less directly visible differences were compact combustion chamber designs with heavily shrouded valves, less aggressive camshaft profiles, a cast crankshaft (rather than a forged crankshaft in the 4A-GE), ports of a small cross sectional area, a very restrictive intake manifold with long runners joined to a small displacement plenum and other changes.

Even though the valve angle is closer to what is considered in some racing circles to be ideal for power (approximately 25 degrees), its other design differences and the intake which is tuned for a primary harmonic resonance at low RPM means that it has about 10% less power compared to the 4A-GE engine. This engine design improves fuel efficiency and torque, but compromises power.

Power ratings varied from in the US market. Applications: AT220 Avensis 1997–2000 (excluding Japan) AT171/175 Carina 1988–1992 (Japan only) AT190 Carina 1984–1996 (Japan only) AT171 Carina II 1987–1992 (Europe only) AT190 Carina E 1992–1997 (Europe only) AT180 Celica 1989–1993 (excluding Japan) AE92/95 Corolla 1988–1997 AE101/104/109 Corolla 1991–2002 AE111/114 Corolla 1995–2002 AE101 Corolla Ceres 1992–1998 (Japan only) AE111 Corolla Spacio 1997–2001 (Japan only) AT175 Corona 1988–1992 (Japan only) AT190 Corona 1992–1996 AT210 Corona 1996–2001 AE95 Sprinter 1989–1991 (Japan only) AE101/104/109 Sprinter 1992–2002 (Japan only) AE111/114 Sprinter 1995–1998 (Japan only) AE95 Sprinter Carib 1988–1990 (Japan only) AE111/114 Sprinter Carib 1996–2001 (Japan only) AE101 Sprinter Marino 1992–1998 (Japan only) AE92/AE111 Corolla/Conquest 1993–2002 (South Africa) Geo Prizm base model (based on Toyota AE92/AE101 chassis) 1989–1997

4A-FHE

Same as the first generation 4A-FE, only more aggressive tune for more output. Called an EFI-S engine. Output: at 6,000 rpm and at 4,800 rpm (compression at 9.5:1) Applications: AT171 Carina 1990–1992 (Japan only) AE95 Sprinter Carib 1990–1995 (Japan only)

4A-GE (16-valve)

The 4A-GE was a series of high-performance four-cylinder twincam engines made by Toyota and was built at Toyota's Shimoyama plant alongside the 4A and 2A engines. The reliability and performance of these engines has earned them a fair number of enthusiasts and a fan base as they are a popular choice for an engine swap into other Toyota cars such as the KE70 and KP61.

New performance parts are still available for sale even today because of its strong fan base. Production of the various models of this version lasted for five generations, from May 1983 through 1991 for the 16-valve versions and up to 2000 for the 20-valve 4A-GE versions.

Fourth Generation "Silver Top"

The fourth-generation 4A-GE engine was produced from 1991 to 1995. It has silver cam covers with chrome lettering, hence the nickname "silver top". This engine yet again features a completely new cylinder head which uses five valves per cylinder instead of four.

It uses Toyota's Variable Valve Timing (VVT) system on the intake cam, an increased compression ratio (10.5:1), and the intake system was replaced with a short manifold with individual throttles and velocity stacks, however the vane-type airflow meter was retained, requiring the use of a plenum. The previous 16-valve head used a sharply curved intake port, while the 20-valve engine used a very upright straight port.

This engine produces at 7,400 rpm with of torque at 5,200 rpm. In South Africa, the 7A-FE engine was used in place of the 20-valve 4A-GE engine in 1993 despite other countries (except North America) moving towards the new engine, as South African fuel was not suitable at the time for the 20-valve 4A-GE engines.

The 20-valve 4A-GE engine would eventually arrive in the Corolla RXi and RSi in the "black top" revision in 1997. Applications: AE101 Corolla Levin coupe 1991–1995 (Japan only) AE101 Sprinter Trueno coupe 1991–1995 (Japan only) AE101 Corolla Ceres hardtop 1992–1995 (Japan only) AE101 Sprinter Marino hardtop 1992–1995 (Japan only) AT210 Carina 1996–2001 (Japan only) AE101 Corolla 1991–2000 (Japan only) AE101 Sprinter 1991–2000 (Japan only)

Fifth Generation "Black Top"

The fifth-generation 4A-GE engine produced from 1995 to 2000 is the final version of the 4A-GE engine and has black cam covers. It uses Toyota Variable Valve Timing (VVT) system on the intake cam. This engine is commonly known as the "black top" due to the color of the valve cover, and yet again features an even higher compression ratio (11:1).

The air flow sensor was replaced by a MAP sensor, the diameter of the four individual throttle bodies was increased from , the exhaust ports diameter were increased by 3 mm, the intake cam lift was increased from , and the intake ports were significantly improved in shape and contour, with the width of the opening at the head increased as well. Additionally, the black top had a lighter flywheel, a larger plenum, lighter connecting rods and revised rubber velocity stacks, and was also offered in 1997 with a six-speed C160 transaxle.

This revision increased the power to at 7,800 rpm with of torque at 5,600 rpm. The 'Blacktop' has become a favorite among enthusiasts and is used as an easy power upgrade for the early Toyota Corolla models, especially for use in the drift scene. Due to the relatively high state of tuning of the stock engine, most power/torque gains come from higher lift cams and engine management.

Some people have said that the power figures of the 20-valve engines from Toyota are inflated; this statement was likely caused by using less than 100 RON fuel (Japanese premium fuel standard; roughly equivalent to 94 AKI or (R+M)/2 fuel) that both 20-valve engines require. Applications: AE111 Corolla Levin coupe 1995–2000 (Japan only) AE111 Sprinter Trueno coupe 1995–2000 (Japan only) AE101 Corolla Ceres hardtop 1995–1998 (Japan only) AE101 Sprinter Marino hardtop 1995–1998 (Japan only) AE101G Corolla BZ touring wagon 1995–1999 (Japan) AE111 Corolla 1995–2000 (Japan only) AE111 Sprinter 1995–1999 (Japan only) AE111 Sprinter Carib 1997–2000 (Japan only) AE111 Corolla RSi and RXi 1997–2002 (South Africa) AT210 Carina 1996-2001 (Japan only)

4A-GZE

The 4A-GZE was a supercharged version of the 4A-GE produced in various forms from August 1986 through 1995. All three generations shared forged and ceramic coated pistons, a SC12 Roots type supercharger, and a stronger 7-rib block and crankshaft, similar to the 1987–1989 "Late Bigport" second-generation 4A-GE.

Toyota Racing Development also developed supercharger kits for the 4A-GZE engines. The 4A-GZE is popular for turbo conversions, as many parts do not need to be modified to support the extra boost.

First Generation

The first-generation 4A-GZE produced peak manifold pressure. It used dished, forged and coated pistons with an 8.0:1 compression ratio. Compared to the 4A-GE, the main differences for the long block were casting holes for a knock sensor and coolant bypass pipes, lower duration cam timing (232º), the upgraded pistons, different valve covers, and the omission of T-VIS.

The first-generation 4A-GZE was rated at at 6400 rpm and at 4400 rpm. The 4A-GZE was first used in the 1986 supercharged Toyota MR2 AW11 until May 1989. It was also used in the 1987–1989 Toyota Corolla AE92 and Sprinter AE92 (Japan-only).

Despite having the same specifications, the MR2 was equipped with a distributor and a single ignition coil while the Corolla and Sprinter was equipped with a distributor-less design and twin coil packs. Applications: AW11 MR2 1986–1989 (Japan, 1988–1989 North America) AE92 Corolla 1987–1989 (Japan only) AE92 Sprinter 1987–1989 (Japan only)

Second Generation

In late 1989, the 4A-GZE was updated with an 8.9:1 compression, and MAP D-Jetronic load sensing and a smaller supercharger pulley producing . These updated 4A-GZE engines were rated at and . Fuel requirements were increased from this generation onwards, requiring at least 100 RON fuel.

It can be denoted by a gray cover on the top-mounted intercooler with an emblem reading "Twin Cam 16 Supercharger". While this cover was also used on early AE92s with the first-generation 4A-GZE, the lack of AFM and its subsequent replacement with MAP in the later AE92s makes this generation easily recognizable.

Applications: AE92 Corolla 1989–1991 (Japan only) AE92 Sprinter 1989–1991 (Japan only)

Third Generation

In mid 1991, the 4A-GZE was further upgraded with the "smallport" cylinder head and the block was equipped with piston skirt oil jets for cooling. These minimal updates further increased output to and . It can be denoted by a black cover on the top-mounted intercooler with an emblem featuring Toyota's then-new logo followed by the word "Supercharger".

While its naturally aspirated counterpart (4A-GE) used five valves per cylinder for a total of 20 valves in its redesigned cylinder head during this timeframe, the 4A-GZE's cylinder head remained unchanged and continued to use four valves per cylinder for a total of 16 valves. Applications: AE101 Corolla 1991–1995 (Japan only) AE101 Sprinter 1991–1995 (Japan only)

Racing Applications

Due to its durability, performance and relatively low cost, 4A-GE and 4A-GZE engines and their derivatives have been popular for both professional and amateur racing since their introduction. The most notable application of the 4A-GE in racing was as in the Formula Atlantic series, where in full race trim the engine will produce at 10,000 rpm.

5A

The 5A was produced from 1987 through 2006. The carbureted 5A-F was produced in 1987 and the fuel injected 5A-FE was produced that year and again from 1995 through 1998. Both used a cylinder bore and stroke of and had 4 valves per cylinder with DOHC heads using the narrow-valve (22.3°) angle. It uses the same High-Mecha Twin Cam system from the 4A-F and 4A-FE.

5A-F

Output for the carb version was at 6000 rpm and at 3600 rpm. Applications: AT170 Carina 1988–1990 (Japan only) AE91 Corolla 1987–1989 (Japan only) AT170 Corona 1987–1989 (Japan only) AE91 Sprinter 1987–1989 (Japan only)

5A-FE

Output for the 1987 FI version was at 6000 rpm and at 4800 rpm. A later one produced at 5600 rpm and at 4400 rpm. Toyota joint venture partner Tianjin FAW Xiali produces the 5A-FE (dubbed 5A+) for its Vela and Weizhi (C1) subcompact sedans.

This version produces at 6000 rpm and at 4400 rpm. Applications: AT170 Carina 1990–1992 (Japan only) AT192 Carina 1992–1996 (Japan only) AT212 Carina 1996–2001 (Japan only) AE91 Corolla 1989–1992 (Japan only) AE100 Corolla 1991–2001 (Japan only) AE110 Corolla 1995–2000 (Japan only) AE100 Corolla Ceres 1992–1998 (Japan only) AT170 Corona 1989–1992 (Japan only) AL50 Soluna 1996–2003 (Asia) AE91 Sprinter 1989–1992 (Japan only) AE100 Sprinter 1991–1995 (Japan only) AE110 Sprinter 1995–2000(Japan only) AE100 Sprinter Marino 1992–1998 (Japan only) AXP42 Vios 2002–2006 (China only) Yema SQJ6451 Xiali Vela (China) Xiali Weizhi (China) Geely CK (China) Geely MK (China)

5A-FHE

Same as the first generation 5A-FE, only more aggressive tune for more output. This engine produces up to due to slightly larger throttle than the standard 5A-FE and different cam profiles. Called an EFI-S engine. Applications: AE91 Corolla 1989–1992 (Japan only) AE91 Sprinter 1989–1992 (Japan only) AE91 Toyota G Touring 1994–1999 (Japan only) AE100 Toyota G Touring 1994–1999 (Japan only)

6A

The 6A-FC was produced from 1989 through 1992. It is the only 1.4 variant of the A-series engines. Output is and . It is a 4-valve, narrow-valve angle DOHC engine using Toyota's High-Mecha Twin Cam system, mainly installed in Australian and European market Corollas.

6A-FC

Applications: AE90 Corolla and Holden Nova 1989–1992 (Australia only)

7A

The 7A was produced from 1990 through 2002. Cylinder bore and stroke was . The largest production A-series engine was the 7A-FE, produced from 1993 through 2002.

It is a 4-valve DOHC narrow-valve angle economy engine stroked out from the 4A, also using the 4A-FE's High-Mecha Twin Cam concept. It is a non-interference type engine. An early Canadian version produced at 5600 rpm and at 2800 rpm.

The common (1993 to 1995 North American) version is rated at at 5600 rpm and at 2800 rpm. The engine output was changed for the 1996 to 1997 (North American) version mainly due to a different antipollution system and different intake which made it rate at at 5200 rpm and of torque at 2800 rpm.

In the United States, the most common application of the 7A-FE was in the 1993–1997 Corolla (7th generation). It was also used in some 1994–1999 Celicas (6th generation) at the base ST trim level, as well as the Toyota Corolla's clone, the Geo Prizm. The Indonesian and Russian versions of the 7A-FE has the strongest naturally aspirated output at at 6000 rpm and at 4400 rpm.

It was used in the AE112 Corolla from 1998 to 2001. In the Australian market, the AE112 Corolla Sportivo had a turbocharged and intercooled 7A-FE, sometimes unofficially referred to as the "7A-FTE". This was a conversion as opposed to a ground-up turbo design, and retains the same 9.5:1 compression ratio used in the naturally aspirated 7A-FE.

Output was at 5,600 rpm and torque was at 3600 rpm, thanks to an IHI RHF4B turbocharger with 0.55 bar of boost pressure. Only 110 Corolla Sportivos were built.

Toyota never made a wide-valve angle high-performance engine based on the 7A called the "7A-GE", however many enthusiasts have created one using a combination of 7A-FE parts (block and crank), 4A-GE parts (head, pistons) and custom connecting rods. The 7A-FE has a smaller crank journal and smaller wrist pins (press fit), and so a few companies have made special rods to accommodate these builds.

Likewise, an unofficial supercharged "7A-GZE" has also been built from 7A-FE parts (block, crank), 4A-GZE parts (head, pistons) and custom connecting rods.

7A-FE

Applications: AT221 Avensis 1997–2000 (Europe only) AT191 Caldina 1996–1997 (Japan only) AT211 Caldina 1997–2001 (Japan only) AT191 Carina 1994–1996 (Japan only) AT211 Carina 1996–2001 (Japan only) AT191 Carina E 1994–1997 (Europe only) AT200 Celica 1993–1999 (excluding Japan) AE92 Corolla/Conquest September 1993 – circa 1998 (South Africa) AE93 Corolla 1990–1992 (Australia only) AE102/103 Corolla 1992–1998 (excluding Japan) AE102 Corolla/Prizm 1993–1997 (North America) AE111 Corolla 1997–2000 (South Africa) AE111 Corolla 1998–2002 (Brazil) AE112/115 Corolla 1997–2002 (excluding Japan) AE115 Corolla Spacio 1997–2001 (Japan only) AE115 Corolla Linea Terra 1997–1999 (Europe only) AT191 Corona 1994–1997 (excluding Japan) AT211 Corona 1996–2001 (Japan only) AE115 Sprinter Carib 1995–2001 (Japan only) AE112 Corolla 1998–2001 (Indonesia and Australia)

8A

The 8A was produced from 1990 through 2006 by Tianjin FAW Xiali for its Daihatsu and Toyota-based subcompacts. It uses the same cylinder bore of as the 5A but with a reduced stroke of . It uses a four valves per cylinder DOHC head with narrow-valve angles.

The High-Mecha Twin Cam system from the 4A-FE and 5A-FE was retained. Compression ratio is 9.3:1. Output is at 6,000 rpm and at 5200 rpm.

8A-FE

Applications: AXP41 Toyota Vios 2002–2006 (China only) AXP41 Xiali Vizi 2002–2006 (China only) Haima CA7130 (China) Xiali 2000/Vela 2000–2012 Xiali A+ 2005–2011 Xiali Weizhi (China) Etsong Lubao QE6400/QE6440/FAW Lubao CA6410/Jiefang CA6440UA

Production

The 1.3 L and 1.5 L A engines are built in Tianjin FAW Toyota Engine Co., Ltd. Plant No. 1. "4AGE to 7AGE conversion"—A good how-to "4A-GE engine rebuild by RSChita" 4A-GE tech notes The Stock 4AGE Description Page "S-86.com"—SQ Engineering - has many 4age related articles Phil Bradshaw's 4A-GE info page

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375120986 under CC BY-SA 4.0; modifications have been made.

Words in each section4A-GE (16-valve)4A-GE (16-valve)4A-GE (16-valve): 716 words7164A-FE4A-FE4A-FE: 688 words6884A-GZE4A-GZE4A-GZE: 480 words4807A7A7A: 374 words3744A-F4A-F4A-F: 278 words2784A, 4A-C, 4A-L, 4A-LC4A, 4A-C, 4A-L, 4A-LC4A, 4A-C, 4A-L, 4A-LC: 226 words2265A-FE5A-FE5A-FE: 155 words1553A-SU3A-SU3A-SU: 149 words1497A-FE7A-FE7A-FE: 132 words1323A-U, 3A-LU3A-U, 3A-LU3A-U, 3A-LU: 115 words1154A4A4A: 94 words94ProductionProductionProduction: 86 words862A2A2A: 77 words778A8A8A: 74 words745A5A5A: 66 words665A-FHE5A-FHE5A-FHE: 64 words642A-U, 2A-LU2A-U, 2A-LU2A-U, 2A-LU: 58 words581A1A1A: 57 words57Racing ApplicationsRacing ApplicationsRacing Applications: 57 words573A3A3A: 51 words513A, 3A-C3A, 3A-C3A, 3A-C: 50 words504A-FHE4A-FHE4A-FHE: 46 words466A6A6A: 46 words464A-ELU4A-ELU4A-ELU: 44 words442A, 2A-L, 2A-LC2A, 2A-L, 2A-LC2A, 2A-L, 2A-LC: 43 words433A-HU3A-HU3A-HU: 43 words438A-FE8A-FE8A-FE: 39 words395A-F5A-F5A-F: 38 words381A-U1A-U1A-U: 25 words256A-FC6A-FC6A-FC: 10 words101A-C1A-C1A-C: 3 words3
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001375120986 · captured 2026-09-15 · ledger · version history

Cite this page as: encyclopegia.org, “Toyota A engine”, snapshot enwiki-001375120986. https://encyclopegia.org/a/toyota-a-engine

Sources cited in this revision

24 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.