Traffic identifier

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In a WLAN, packets can be a stream of video, voice, or data, which each have different priorities to be served by an access point. The Traffic Identifier (TID) is an identifier used to classify a packet in Wireless LANs. When a base station receives an 802.11 frame with the TID set for audio, for example, the priority given is higher than a data frame. TID is part of a QoS concept in Wireless LAN introduced by the Institute of Electrical and Electronics Engineers in 802.11e as part of the 802.11 standards family. It is represented as a four-bit number (0-3), identifying QoS traffic within MAC data services. There are 16 (2 4 ) possible values for TID; out of them, only 8 are practically usable to identify differentiated services. The values of TID is similar to the values used in Differentiated services. The TID subfield sits in certain MAC frames. The presence of TID, and thus the presence of QoS, is determined by the value set in the MSB of the subtype field (bit b7) of the Frame Control field. A QoS-enabled 802.11 header uses the TID to classify and prioritize processing of incoming or outgoing frames. A TID value from 0-7 are defined for user traffic priority and mapped to Access Categories (AC) while TID range 8-15 is reserved for management and control frames.

In a WLAN, packets can be a stream of video, voice, or data, which each have different priorities to be served by an access point. The Traffic Identifier (TID) is an identifier used to classify a packet in Wireless LANs. When a base station receives an 802.11 frame with the TID set for audio, for example, the priority given is higher than a data frame. TID is part of a QoS concept in Wireless LAN introduced by the Institute of Electrical and Electronics Engineers in 802.11e as part of the 802.11 standards family. It is represented as a four-bit number (0-3), identifying QoS traffic within MAC data services. There are 16 (2 4 ) possible values for TID; out of them, only 8 are practically usable to identify differentiated services. The values of TID is similar to the values used in Differentiated services. The TID subfield sits in certain MAC frames. The presence of TID, and thus the presence of QoS, is determined by the value set in the MSB of the subtype field (bit b7) of the Frame Control field. A QoS-enabled 802.11 header uses the TID to classify and prioritize processing of incoming or outgoing frames. A TID value from 0-7 are defined for user traffic priority and mapped to Access Categories (AC) while TID range 8-15 is reserved for management and control frames.

References

External links

Approval from the IEEE RevCom 802.11e TGe Status (finished) 802.11e Amendment QoX: What is It Really

Text derived from https://en.wikipedia.org/w/index.php?oldid=1308105766 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001308105766 · captured 1756297933.0 · version history

Cite this page as: encyclopegia.org, “Traffic identifier”, snapshot enwiki-001308105766. https://encyclopegia.org/a/traffic-identifier

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.