Lesson plan

Traffic indication map

Traffic indication map (TIM) is a structure used in IEEE 802.11 wireless network management frames. The traffic indication map information element is covered under section 7.3.2.6 of 802.11-1999 standard. The IEEE 802.11 standards use a bitmap to indicate to any sleeping listening stations that the access point (AP) has buffered data waiting for it. Because stations should listen to at least one beacon during the listen interval, the AP periodically sends this bitmap in its beacons as an information element. The bit mask is called the traffic indication map and consists of 2008 bits, each bit representing the association ID (AID) of a station. However, in most situations an AP only has data for a few stations, so only the portion of the bitmap representing those stations needs to be transmitted. Because the bitmap is never transmitted in its entirety, it is referred to as a virtual bitmap, and the portion that is actually transmitted is referred to as a partial virtual bitmap. The structure of the TIM is as follows: ;element ID :(1 octet) :identifies a TIM element ;length :(1 octet) :the size of the whole element (5 to 255) ;DTIM_count :(1 octet) :the number of beacons remaining before a DTIM (including this frame, so 0 means that this frame is a DTIM) ;DTIM_period :(1 octet) :A scaling factor indicating that only every nth beacon includes a TIM.…

Back to article

Article summary

Traffic indication map (TIM) is a structure used in IEEE 802.11 wireless network management frames. The traffic indication map information element is covered under section 7.3.2.6 of 802.11-1999 standard. The IEEE 802.11 standards use a bitmap to indicate to any sleeping listening stations that the access point (AP) has buffered data waiting for it. Because stations should listen to at least one beacon during the listen interval, the AP periodically sends this bitmap in its beacons as an information element. The bit mask is called the traffic indication map and consists of 2008 bits, each bit representing the association ID (AID) of a station. However, in most situations an AP only has data for a few stations, so only the portion of the bitmap representing those stations needs to be transmitted. Because the bitmap is never transmitted in its entirety, it is referred to as a virtual bitmap, and the portion that is actually transmitted is referred to as a partial virtual bitmap. The structure of the TIM is as follows: ;element ID :(1 octet) :identifies a TIM element ;length :(1 octet) :the size of the whole element (5 to 255) ;DTIM_count :(1 octet) :the number of beacons remaining before a DTIM (including this frame, so 0 means that this frame is a DTIM) ;DTIM_period :(1 octet) :A scaling factor indicating that only every nth beacon includes a TIM.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.