Trailer brake controller

Uses your system voice; voice and rate in settings.

Q7832803Snapshot

≈ 4 min read

Names in other languages

  • EnglishTrailer brake controller

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A brake controller is usually an original equipment manufacturer or aftermarket-installed device or module. It is mounted to the tow vehicle's driver's-side dashboard area, and engages a trailer's electrical braking system either time delayed, or in proportion to the tow vehicle's brake engagement when slowing down or coming to a halt. A brake controller is not needed with a trailer surge braking system unless using modern electric over hydraulic devices. The trailer in this case usually has either electric friction brakes or electric-hydraulic trailer brake actuators. Most basic brake controllers will generally have a plus-minus gain adjustment. The tow vehicle operator sets the gain as high as possible but without the trailer brakes locking up after making a few test stops. The heavier the trailer, the higher the gain adjustment is set and therefore the less chances of wheel lock-up. A wide range of trailers contain trailer brakes (for example, larger boat trailers, horse trailers, covered utility trailers, enclosed trailers, travel trailers including small and longer tent trailers and car carriers). Smaller trailers may not contain trailer brakes (for example, basic utility trailers). It is recommended that, if the total trailer weight is over a couple thousand kilograms, the trailer have some sort of braking system, and the tow vehicle be equipped with a brake controller.

A brake controller is usually an original equipment manufacturer or aftermarket-installed device or module. It is mounted to the tow vehicle's driver's-side dashboard area, and engages a trailer's electrical braking system either time delayed, or in proportion to the tow vehicle's brake engagement when slowing down or coming to a halt. A brake controller is not needed with a trailer surge braking system unless using modern electric over hydraulic devices. The trailer in this case usually has either electric friction brakes or electric-hydraulic trailer brake actuators. Most basic brake controllers will generally have a plus-minus gain adjustment. The tow vehicle operator sets the gain as high as possible but without the trailer brakes locking up after making a few test stops. The heavier the trailer, the higher the gain adjustment is set and therefore the less chances of wheel lock-up. A wide range of trailers contain trailer brakes (for example, larger boat trailers, horse trailers, covered utility trailers, enclosed trailers, travel trailers including small and longer tent trailers and car carriers). Smaller trailers may not contain trailer brakes (for example, basic utility trailers). It is recommended that, if the total trailer weight is over a couple thousand kilograms, the trailer have some sort of braking system, and the tow vehicle be equipped with a brake controller.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1326123130 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot trailer-brake-controller-881068-ad14664f67326e96 · hash ad14664f67326e961523355e56f0adc9e72a0bd9aeeeca1f33c60a211d45a45b · captured 1765081768.0 · version history

Cite this page as: encyclopegia.org, “Trailer brake controller”, snapshot trailer-brake-controller-881068-ad14664f67326e96. https://encyclopegia.org/a/trailer-brake-controller

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.