Lesson plan
Tramming
to ensure good adhesion of the first layer Tramming is the adjustment of two planes or axis so that they are parallel or orthogonal (perpendicular) to each other. It is important in machine tools to ensure smooth processing of the workpiece. Sometimes tramming is erroneously referred to as "bed leveling", which means adjusting something orthogonally to a gravitational field. This is a misnomer, since tramming, however, is only about the internal geometry of a machine. That is, none of the surfaces in the machine need be horizontal or vertical according to the gravitational field as long as they are parallel or orthogonal to each other. Confusing the two can produce undesirable results.
Article summary
to ensure good adhesion of the first layer Tramming is the adjustment of two planes or axis so that they are parallel or orthogonal (perpendicular) to each other. It is important in machine tools to ensure smooth processing of the workpiece. Sometimes tramming is erroneously referred to as "bed leveling", which means adjusting something orthogonally to a gravitational field. This is a misnomer, since tramming, however, is only about the internal geometry of a machine. That is, none of the surfaces in the machine need be horizontal or vertical according to the gravitational field as long as they are parallel or orthogonal to each other. Confusing the two can produce undesirable results.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.