Transistor fault

A transistor fault is a fault model used to describe faults for CMOS logic gates.

Uses your system voice; voice and rate in settings.

≈ 1 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A transistor fault is a fault model used to describe faults for CMOS logic gates. A transistor may be stuck-short or stuck-open. In stuck-short, a transistor behaves as it is always conducts (stuck-on).

In stuck-open, a transistor never conducts current (stuck-off). Stuck-short will usually produce a short between VDD and VSS. In the example picture, a faulty PMOS transistor in a CMOS NAND Gate is shown (M3-highlighted transistor).

If M3 is stuck-open, then in case we apply A=1 and B=0 then the output of the circuit will become Z. And if M3 is stuck-short, then the output will always be connected to 1, and it also may short VCC to GND in case we apply A=B=1.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1371702564 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001371702564 · captured 2026-08-27 · ledger · version history

Cite this page as: encyclopegia.org, “Transistor fault”, snapshot enwiki-001371702564. https://encyclopegia.org/a/transistor-fault

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.