Lesson plan
Translucent concrete
Translucent concrete (also: light-transmitting concrete) is a concrete based building material with light-transmissive properties due to embedded light optical elements — usually optical fibers. Light is conducted through the stone from one end to the other. Therefore, the fibers have to go through the whole object. This results in a certain light pattern on the other surface, depending on the fiber structure. Shadows cast onto one side appear as silhouettes through the material. Translucent concrete is used in fine architecture as a façade material and for the cladding of interior walls. Light-transmitting concrete has also been applied to various design products. Several ways of producing translucent concrete exist. All are based on a fine grain concrete (ca. 95%) and only 5% light conducting elements that are added during the casting process. After setting, the concrete is cut to plates or stones with standard machinery for cutting stone materials. Due to bends in the fibers and roughnesses on the cut surfaces of the fibers, light transmission is generally a bit less than half the incident light on the fibers, so given five percent fibers, about two percent. As the human eye's response to light is non-linear, this can still give useful daylighting.…
Article summary
Translucent concrete (also: light-transmitting concrete) is a concrete based building material with light-transmissive properties due to embedded light optical elements — usually optical fibers. Light is conducted through the stone from one end to the other. Therefore, the fibers have to go through the whole object. This results in a certain light pattern on the other surface, depending on the fiber structure. Shadows cast onto one side appear as silhouettes through the material. Translucent concrete is used in fine architecture as a façade material and for the cladding of interior walls. Light-transmitting concrete has also been applied to various design products. Several ways of producing translucent concrete exist. All are based on a fine grain concrete (ca. 95%) and only 5% light conducting elements that are added during the casting process. After setting, the concrete is cut to plates or stones with standard machinery for cutting stone materials. Due to bends in the fibers and roughnesses on the cut surfaces of the fibers, light transmission is generally a bit less than half the incident light on the fibers, so given five percent fibers, about two percent. As the human eye's response to light is non-linear, this can still give useful daylighting.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.