Transmon

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In quantum computing, and more specifically in superconducting quantum computing, a transmon is a type of superconducting charge qubit designed to have reduced sensitivity to charge noise. The transmon was developed by Jens Koch, Terri M. Yu, Jay Gambetta, Andrew Houck, David Schuster, Johannes Majer, Alexandre Blais, Michel Devoret, Steven M. Girvin, and Robert J. Schoelkopf at Yale University and Université de Sherbrooke in 2007. Its name is an abbreviation of the term transmission line shunted plasma oscillation qubit; one which consists of a Cooper-pair box "where the two superconductors are also [capacitively] shunted in order to decrease the sensitivity to charge noise, while maintaining a sufficient anharmonicity for selective qubit control". es, and four readout resonators fabricated by IBM and published in npj Quantum Information in January 20171. The transmon achieves its reduced sensitivity to charge noise by significantly increasing the ratio of the Josephson energy to the charging energy. This is accomplished through the use of a large shunting capacitor. The result is energy level spacings that are approximately independent of offset charge. Planar on-chip transmon qubits have T 1 coherence times approximately 30 μs to 40 μs.…

In quantum computing, and more specifically in superconducting quantum computing, a transmon is a type of superconducting charge qubit designed to have reduced sensitivity to charge noise. The transmon was developed by Jens Koch, Terri M. Yu, Jay Gambetta, Andrew Houck, David Schuster, Johannes Majer, Alexandre Blais, Michel Devoret, Steven M. Girvin, and Robert J. Schoelkopf at Yale University and Université de Sherbrooke in 2007. Its name is an abbreviation of the term transmission line shunted plasma oscillation qubit; one which consists of a Cooper-pair box "where the two superconductors are also [capacitively] shunted in order to decrease the sensitivity to charge noise, while maintaining a sufficient anharmonicity for selective qubit control". es, and four readout resonators fabricated by IBM and published in npj Quantum Information in January 2017. The transmon achieves its reduced sensitivity to charge noise by significantly increasing the ratio of the Josephson energy to the charging energy. This is accomplished through the use of a large shunting capacitor. The result is energy level spacings that are approximately independent of offset charge. Planar on-chip transmon qubits have T 1 coherence times approximately 30 μs to 40 μs. Recent work has shown significantly improved T 1 times as long as 95 μs by replacing the superconducting transmission line cavity with a three-dimensional superconducting cavity, and by replacing niobium with tantalum in the transmon device, T 1 is further improved up to 0.3 ms. These results demonstrate that previous T 1 times were not limited by Josephson junction losses. Understanding the fundamental limits on the coherence time in superconducting qubits such as the transmon is an active area of research. The benefit of increasing the E_{\rm J}/E_{\rm C} ratio is the insensitivity to charge noise—the energy levels become independent of the offset charge n_g across the junction; thus the dephasing time of the qubit is prolonged. The disadvantage is the reduced anharmonicity \alpha = (E_{21}-E_{10})/E_{10} , where E_{ij} is the energy difference between eigenstates |i\rangle and | j \rangle . Reduced anharmonicity complicates the device operation as a two level system, e.g. exciting the device from the ground state to the first excited state by a resonant pulse also populates the higher excited state. This complication is overcome by complex microwave pulse design, that takes into account the higher energy levels, and prohibits their excitation by destructive interference. Also, while the variation of E_{10} with respect to n_g tend to decrease exponentially with E_{\mathrm J}/ E_{\mathrm C} , the anharmonicity only has a weaker, algebraic dependence on E_{\mathrm J}/E_{\mathrm C} as \sim (E_{\mathrm J}/E_{\mathrm C})^{-1/2} . The significant gain in the coherence time outweigh the decrease in the anharmonicity for controlling the states with high fidelity. Measurement, control and coupling of transmons is performed by means of microwave resonators with techniques from circuit quantum electrodynamics also applicable to other superconducting qubits. Coupling to the resonators is done by placing a capacitor between the qubit and the resonator, at a point where the resonator electromagnetic field is greatest. For example, in IBM Quantum Experience devices, the resonators are implemented with "quarter wave" coplanar waveguides with maximal field at the signal-ground short at the waveguide end; thus every IBM transmon qubit has a long resonator "tail". The initial proposal included similar transmission line resonators coupled to every transmon, becoming a part of the name. However, charge qubits operated at a similar E_{\rm J}/E_{\rm C} regime, coupled to different kinds of microwave cavities are referred to as transmons as well.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377984572 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Transmon” revision 1377984572 · retrieved 2026-10-20 publication date (×1) · confidence 0.95 revision URL