Transparency (human–computer interaction)

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Any change in a computing system, such as a new feature or new component, is transparent if the system after change adheres to previous external interface as much as possible while changing its internal behaviour. The purpose is to shield from change all systems (or human users) on the other end of the interface. Confusingly, the term refers to overall invisibility of the component, it does not refer to visibility of component's internals (as in white box or open system). The term transparent is widely used in computing marketing in substitution of the term invisible, since the term invisible has a bad connotation (usually seen as something that the user can't see, and has no control over) while the term transparent has a good connotation (usually associated with not hiding anything). The vast majority of the times, the term transparent is used in a misleading way to refer to the actual invisibility of a computing process, which is also described by the term opaque, especially with regard to data structures. Because of this misleading and counter-intuitive definition, modern computer literature tends to prefer use of "agnostic" over "transparent". The term is used particularly often with regard to an abstraction layer that is invisible either from its upper or lower neighbouring layer.…

Any change in a computing system, such as a new feature or new component, is transparent if the system after change adheres to previous external interface as much as possible while changing its internal behaviour. The purpose is to shield from change all systems (or human users) on the other end of the interface. Confusingly, the term refers to overall invisibility of the component, it does not refer to visibility of component's internals (as in white box or open system). The term transparent is widely used in computing marketing in substitution of the term invisible, since the term invisible has a bad connotation (usually seen as something that the user can't see, and has no control over) while the term transparent has a good connotation (usually associated with not hiding anything). The vast majority of the times, the term transparent is used in a misleading way to refer to the actual invisibility of a computing process, which is also described by the term opaque, especially with regard to data structures. Because of this misleading and counter-intuitive definition, modern computer literature tends to prefer use of "agnostic" over "transparent". The term is used particularly often with regard to an abstraction layer that is invisible either from its upper or lower neighbouring layer. Also temporarily used later around 1969 in IBM and Honeywell programming manuals the term referred to a certain computer programming technique. An application code was transparent when it was clear of the low-level detail (such as device-specific management) and contained only the logic solving a main problem. It was achieved through encapsulation – putting the code into modules that hid internal details, making them invisible for the main application.

Further reading

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378335711 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.