Lesson plan
Transparency (telecommunication)
In telecommunications, transparency can refer to: #The property of an entity that allows another entity to pass through it without altering either of the entities. #The property that allows a transmission system or channel to accept, at its input, unmodified user information, and deliver corresponding user information at its output, unchanged in form or information content. The user information may be changed internally within the transmission system, but it is restored to its original form prior to the output without the involvement of the user. #The quality of a data communications system or device that uses a bit-oriented link protocol that does not depend on the bit sequence structure used by the data source. Some communication systems are not transparent. Non-transparent communication systems have one or both of the following problems: * user data may be incorrectly interpreted as internal commands. For example, modems with a Time Independent Escape Sequence or 20th century Signaling System No. 5 and R2 signalling telephone systems, which occasionally incorrectly interpreted user data (from a "blue box") as commands. * output "user data" may not always be the same as input user data.…
Article summary
In telecommunications, transparency can refer to: #The property of an entity that allows another entity to pass through it without altering either of the entities. #The property that allows a transmission system or channel to accept, at its input, unmodified user information, and deliver corresponding user information at its output, unchanged in form or information content. The user information may be changed internally within the transmission system, but it is restored to its original form prior to the output without the involvement of the user. #The quality of a data communications system or device that uses a bit-oriented link protocol that does not depend on the bit sequence structure used by the data source. Some communication systems are not transparent. Non-transparent communication systems have one or both of the following problems: * user data may be incorrectly interpreted as internal commands. For example, modems with a Time Independent Escape Sequence or 20th century Signaling System No. 5 and R2 signalling telephone systems, which occasionally incorrectly interpreted user data (from a "blue box") as commands. * output "user data" may not always be the same as input user data.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.