Transverse engine

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A transverse engine is an engine mounted in a vehicle so that the engine's crankshaft axis is perpendicular to the direction of travel. Many modern front-wheel drive vehicles use this arrangement. Most rear-wheel drive vehicles use a longitudinal engine, where the engine's crankshaft axis is parallel with the direction of travel. (Some rear-mid engine vehicles use a transverse engine and transaxle mounted in the rear instead of the front). Transverse engines save space in light vehicles, and are used on armoured fighting vehicles for the same reason.

]] A transverse engine is an engine mounted in a vehicle so that the engine's crankshaft axis is perpendicular to the direction of travel. Many modern front-wheel drive vehicles use this arrangement. Most rear-wheel drive vehicles use a longitudinal engine, where the engine's crankshaft axis is parallel with the direction of travel. (Some rear-mid engine vehicles use a transverse engine and transaxle mounted in the rear instead of the front). Transverse engines save space in light vehicles, and are used on armoured fighting vehicles for the same reason.

History

The Critchley light car, made by the Daimler Motor Company in 1899, had a transverse engine with belt drive to the rear axle. The first successful transverse-engine cars were the two-cylinder DKW F1 series of cars, which first appeared in 1931. During WWII, transverse engines were developed for armored vehicles, with the Soviet T-44 and T-54/T-55 tanks being equipped with transverse engines to save space within the hull. The T-54/55 eventually became the most produced tank in history.

Position placement of transverse engines

Engines may be placed in two main positions within the motor car: Front-engine transversely-mounted / Front-wheel drive Rear mid-engine transversely-mounted / Rear-wheel drive

Common types of transversely placed engines

Space allowed for engines within the front wheel wells is commonly limited to the following: Single cylinder Inline-two Inline-three Inline-four Inline-five Inline-six (for rear-engined buses) V4 V6

Less common types of transversely-placed engines

Inline-six: Austin Kimberley, Tasman; Austin 2200, Morris 2200, Wolseley Six); Austin/Morris 2200 HL, Wolseley Saloon, Princess; Daewoo Magnus (aka Chevrolet Epica/Evanda, Suzuki Verona); Daewoo Tosca (aka Chevrolet/Holden Epica); Land Rover Freelander 2 (aka LR2); Volvo S80; Volvo S60 (2nd generation, also V60); Volvo V70 (3rd generation); Volvo XC60; Volvo XC90 V8: Buick LaCrosse LaCrosse Super (2008–2009), Cadillac Allanté, Ford Taurus SHO (3rd generation), Hyundai Equus/Centennial (1st generation), Lancia Thema 8.32, Lincoln Continental (1995-2002 only), Mitsubishi Dignity, Mitsubishi Proudia, Oldsmobile Aurora, Volvo S80, Volvo XC90 V12 (mid-engine only): Lamborghini Miura V16 (mid-engine only): Cizeta-Moroder V16T

Alternative convention with twin-cylinder motorcycles

The description of the orientation of V-twin and flat-twin motorcycle engines sometimes differs from the convention as stated above. Motorcycles with a V-twin engine mounted with its crankshaft parallel to the direction of travel, e.g. the AJS S3 V-twin, Indian 841, Victoria Bergmeister, Honda CX series and several Moto Guzzis since the 1960s, are said to have "transverse" engines, due to the cylinders being perpendicular to the direction of travel.

Notes

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1371506603 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.