Trapezoid

Uses your system voice; voice and rate in settings.

Snapshot

≈ 10 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In geometry, a trapezoid ( ) in North American English or trapezium ( ) in British English is a quadrilateral that has at least one pair of parallel sides. The parallel sides are called the bases of the trapezoid. The other two sides are called the legs or lateral sides. If the trapezoid is a parallelogram, then the choice of bases and legs is arbitrary. A trapezoid is usually considered to be a convex quadrilateral in Euclidean geometry, but there are also crossed cases. If shape ABCD is a convex trapezoid, then the ABDC is a crossed trapezoid. The metric formulas in this article apply in convex trapezoids.

In geometry, a trapezoid ( ) in North American English or trapezium ( ) in British English is a quadrilateral that has at least one pair of parallel sides. The parallel sides are called the bases of the trapezoid. The other two sides are called the legs or lateral sides. If the trapezoid is a parallelogram, then the choice of bases and legs is arbitrary. A trapezoid is usually considered to be a convex quadrilateral in Euclidean geometry, but there are also crossed cases. If shape ABCD is a convex trapezoid, then the ABDC is a crossed trapezoid. The metric formulas in this article apply in convex trapezoids.

Condition of existence

Four lengths a, c, b, d can constitute the consecutive sides of a non-parallelogram trapezoid with a and b parallel only when \displaystyle |d-c| The quadrilateral is a parallelogram when d-c = b-a = 0 , but it is an ex-tangential quadrilateral (which is not a trapezoid) when |d-c| = |b-a| \neq 0 .

Characterizations

Given a convex quadrilateral, the following properties are equivalent, and each implies that the quadrilateral is a trapezoid: It has two adjacent angles that are supplementary, that is, they add up to 180 degrees. The angle between a side and a diagonal is equal to the angle between the opposite side and the same diagonal. The diagonals cut each other in mutually the same ratio (this ratio is the same as that between the lengths of the parallel sides). The diagonals cut the quadrilateral into four triangles of which one opposite pair have equal areas. The product of the areas of the two triangles formed by one diagonal equals the product of the areas of the two triangles formed by the other diagonal. The areas S and T of some two opposite triangles of the four triangles formed by the diagonals satisfy the equation \sqrt{K} = \sqrt{S}+\sqrt{T}, where K is the area of the quadrilateral. The midpoints of two opposite sides of the trapezoid and the intersection of the diagonals are collinear. The angles in the quadrilateral ABCD satisfy \sin A\sin C=\sin B\sin D. The cosines of two adjacent angles sum to 0, as do the cosines of the other two angles. The cotangents of two adjacent angles sum to 0, as do the cotangents of the other two adjacent angles. One bimedian divides the quadrilateral into two quadrilaterals of equal areas. Twice the length of the bimedian connecting the midpoints of two opposite sides equals the sum of the lengths of the other sides. Additionally, the following properties are equivalent, and each implies that opposite sides a and b are parallel: The consecutive sides a, c, b, d and the diagonals p, q satisfy the equation p^2+q^2=c^2+d^2+2ab. The distance v between the midpoints of the diagonals satisfies the equation v=\frac {2}. m = \frac{a + b}{2}. The midsegment of a trapezoid is one of the two bimedians (the other bimedian divides the trapezoid into equal areas). The height (or altitude) is the perpendicular distance between the bases. In the case that the two bases have different lengths (a ≠ b), the height of a trapezoid h can be determined by the length of its four sides using the formula h= \frac{\sqrt{(p-2a)(p-2b)(p-2b-2d)(p-2b-2c)}}{2|b-a|} where c and d are the lengths of the legs and p = a+b+c+d . K = \tfrac{1}{2} (a + b) h =\tfrac{1}{2} (a + b) c\sin A where a and b are the lengths of the bases, and h(=c\sin A) is the height (the perpendicular distance between these sides). This method was used in the classical age of India in Aryabhata's Aryabhatiya (section 2.8), yielding as a special case the well-known formula for the area of a triangle, by considering a triangle as a degenerate trapezoid in which one of the parallel sides has shrunk to a point. The 7th-century Indian mathematician Bhāskara I derived the following formula for the area of a trapezoid with consecutive sides a , c , b , d : K = \frac{1}{2}(a+b)\sqrt{c^2-\frac{1}{4}\left((b-a)+\frac{c^2-d^2}{b-a}\right)^2} where a and b are parallel and b > a . This formula can be factored into a more symmetric version K = \frac{a+b}{4|b-a|}\sqrt{(-a+b+c+d)(a-b+c+d)(a-b+c-d)(a-b-c+d)}. When one of the parallel sides has shrunk to a point (say a = 0), this formula reduces to Heron's formula for the area of a triangle. Another equivalent formula for the area, which more closely resembles Heron's formula, is K = \frac{a+b} \sqrt{(s-b)(s-a)(s-b-c)(s-b-d)} where s = \tfrac{1}{2}(a + b + c + d) is the semiperimeter of the trapezoid. (This formula is similar to Brahmagupta's formula, but it differs from it, in that a trapezoid might not be cyclic (inscribed in a circle). The formula is also a special case of Bretschneider's formula for a general quadrilateral). From Bretschneider's formula, it follows that K= \sqrt{\frac{\left(ab^2-a^2 b-ad^2+bc^2\right)\left(ab^2-a^2 b-ac^2+bd^2\right)}{4(b-a)^2} - \left(\frac{c^2+d^2-a^2-b^2}{4}\right)^2}. The bimedian connecting the parallel sides bisects the area. More generally, any line drawn through the midpoint of the median parallel to the bases, that intersects the bases, bisects the area. Any triangle connecting the two ends of one leg to the midpoint of the other leg is also half of the area. \begin{align} p &= \sqrt{\frac{ab^2-a^2b-ac^2+bd^2}{b-a}}, \\ q &= \sqrt{\frac{ab^2-a^2b-ad^2+bc^2}{b-a}}, \end{align} where a is the short base, b is the long base, and c and d are the trapezoid legs. If the trapezoid is divided into four triangles by its diagonals AC and BD (as shown on the right), intersecting at O, then the area of is equal to that of , and the product of the areas of and is equal to that of and . The ratio of the areas of each pair of adjacent triangles is the same as that between the lengths of the parallel sides. If is the length of the line segment parallel to the bases, passing through the intersection of the diagonals, with one endpoint on each leg, then is the harmonic mean of the lengths of the bases: \frac{1}{\ell}=\frac{1}{2} \left( \frac{1}{a}+ \frac{1}{b} \right). The line that goes through both the intersection point of the extended nonparallel sides and the intersection point of the diagonals, bisects each base. x = \frac{h}{3} \left( \frac{2a+b}{a+b}\right). The center of area divides this segment in the ratio (when taken from the short to the long side) \frac{a+2b}{2a+b}. If the angle bisectors to angles A and B intersect at P, and the angle bisectors to angles C and D intersect at Q, then PQ=\frac {2}. \int_{a}^{b} f(x)\, dx \approx \sum_{k=1}^{N} \tfrac12 \bigl( f(x_{k-1}) + f(x_{k}) \bigr) \Delta x, where N is the number of intervals, x_0 = a , x_N = b , and \Delta x = (b - a) / N . Graphically, this amounts to approximating the region under the graph of the function by a collection of trapezoids, so this method is called the trapezoidal rule. When any rectangle is viewed in perspective from a position which is centered on one axis but not the other, it appears to be an isosceles trapezoid, called the keystone effect because arch keystones are commonly trapezoidal. For example, when a rectangular building façade is photographed from the ground at a position directly in front using a rectilinear lens, the image of the building is an isosceles trapezoid. Such photographs sometimes have a "keystone transformation" applied to them to recover rectangular shapes. Video projectors sometimes apply such a keystone transformation to the recorded image before projection, so that the image projected on a flat screen appears undistorted. Trapezoidal doors and windows were the standard style for the Inca, although it can be found used by earlier cultures of the same region and did not necessarily originate with them. An almena, a battlement feature characteristic of Moorish architecture, is trapezoidal. Michaelangelo's redesign of the Piazza del Campidoglio (see photograph at right) incorporated a trapezoid surrounding an ellipse, giving the effect of a square surrounding a circle when seen foreshortened at ground level. Cinematography takes advantage of trapezoids in the opposite way, to produce an excessive foreshortening effect from the camera viewpoint, giving the illusion of greater depth to a room in a movie studio than the set physically has. Trapezoids were also used to produce the visual distortions of Caligarism. Canals and drainage ditches commonly have a trapezoidal cross-section. In biology, especially morphology and taxonomy, terms such as trapezoidal or trapeziform commonly are useful in descriptions of particular organs or forms. Trapezoids are sometimes used as a graphical symbol. In circuit diagrams, a trapezoid is the symbol for a multiplexer. An isosceles trapezoid is used for the shape of road signs, for example, on secondary highways in Ontario, Canada.

See also

Frustum, a solid having trapezoidal faces. Inscribed square problem#Curves without special trapezoids Trapezoid graph, an intersection graph resembling trapezoid. Trapezoidal distribution, a continuous probability distribution whose probability density function graph resembles a trapezoid. Trapezoidal thread form, a screw thread profile with trapezoidal outlines. Trapezoidal wing, straight-edged and tapered wing planform of an aircraft. Wedge, a polyhedron defined by two triangles and three trapezoid faces.

Further reading

External links

"Trapezium" at the Encyclopedia of Mathematics Trapezoid definition, Area of a trapezoid, Median of a trapezoid (with interactive animations) Trapezoid (North America) at elsy.at: Animated course (construction, circumference, area) Trapezoidal Rule on Numerical Methods for Stem Undergraduate Autar Kaw and E. Eric Kalu, Numerical Methods with Applications (2008) Some Trapezoid (Trapezium) Explorations at Dynamic Geometry Sketches

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378189132 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

13 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.