Lesson plan

TRI-D (rocket engine)

TRI-D is a 3D printed metal rocket engine. Students from the Students for the Exploration and Development of Space at University of California, San Diego (SEDS at UC San Diego) built the metal rocket engine using a technique previously confined to NASA, using a GPI Prototype and Manufacturing Services printer via the Direct metal laser sintering (DMLS) method. UCSD students were the first group in the world to 3D print a rocket engine of its size, other than NASA as of February 2014. The Tri-D engine cost US$6,800.

Back to article

Article summary

TRI-D is a 3D printed metal rocket engine. Students from the Students for the Exploration and Development of Space at University of California, San Diego (SEDS at UC San Diego) built the metal rocket engine using a technique previously confined to NASA, using a GPI Prototype and Manufacturing Services printer via the Direct metal laser sintering (DMLS) method. UCSD students were the first group in the world to 3D print a rocket engine of its size, other than NASA as of February 2014. The Tri-D engine cost US$6,800.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.