Lesson plan
Tribsa
. A Tribsa, was a custom built café racer or off-road motorcycle of the 1960s and 1970s. A Tribsa comprises a Triumph parallel twin engine installed in BSA motorcycle frame. The purpose was to combine the best elements of each marque to give a superior bike to either. The Tribsa name is a portmanteau word, an amalgamation of Triumph and BSA. Although both the BSA A65 and the Triumph 650 cc twins engines were pushrod overhead valve (OHV) units, only the Triumph had twin camshafts, which supposedly facilitated tuning for a greater power output. The BSA frame was a duplex-cradle design which was considered stiffer and stronger than the Triumph's single downtube item. A batch of nine TriBSAs were planned by the BSA-Triumph for the 1966 ISDT using 348 cc, 490 cc and 'special capacity' 504 cc 'short' Triumph twin engines in a frame using geometry from the BSA Victor scrambler, Victor front forks and wheel together with a Triumph QD rear wheel in a Triumph swinging arm A light-alloy Gold Star type fuel tank and a steel oil tank were fitted together with three ignition coils, one as a spare. The 490 cc prototype was finished and tested in Wales with the remaining batch utilising the other engine sizes scheduled to follow. Some bikes were intended to be named Triumph and the others BSA, to enable two opportunities for makers' honours.…
Article summary
. A Tribsa, was a custom built café racer or off-road motorcycle of the 1960s and 1970s. A Tribsa comprises a Triumph parallel twin engine installed in BSA motorcycle frame. The purpose was to combine the best elements of each marque to give a superior bike to either. The Tribsa name is a portmanteau word, an amalgamation of Triumph and BSA. Although both the BSA A65 and the Triumph 650 cc twins engines were pushrod overhead valve (OHV) units, only the Triumph had twin camshafts, which supposedly facilitated tuning for a greater power output. The BSA frame was a duplex-cradle design which was considered stiffer and stronger than the Triumph's single downtube item. A batch of nine TriBSAs were planned by the BSA-Triumph for the 1966 ISDT using 348 cc, 490 cc and 'special capacity' 504 cc 'short' Triumph twin engines in a frame using geometry from the BSA Victor scrambler, Victor front forks and wheel together with a Triumph QD rear wheel in a Triumph swinging arm A light-alloy Gold Star type fuel tank and a steel oil tank were fitted together with three ignition coils, one as a spare. The 490 cc prototype was finished and tested in Wales with the remaining batch utilising the other engine sizes scheduled to follow. Some bikes were intended to be named Triumph and the others BSA, to enable two opportunities for makers' honours.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.