Lesson plan

trill

TRILL (Transparent Interconnection of Lots of Links) is a networking protocol for optimizing bandwidth and resilience in Ethernet networks, implemented by devices called TRILL switches. TRILL combines techniques from bridging and routing, and is the application of link-state routing to the VLAN-aware customer-bridging problem. Routing bridges (RBridges) are compatible with, and can incrementally replace, previous IEEE 802.1 customer bridges. TRILL Switches are also compatible with IPv4 and IPv6, routers and end systems. They are invisible to current IP routers, and like conventional routers, RBridges terminate the broadcast, unknown-unicast and multicast traffic of DIX Ethernet and the frames of IEEE 802.2 LLC including the bridge protocol data units of the Spanning Tree Protocol. TRILL was designed as a successor to the Spanning Tree Protocol, both having been created by the same person, Radia Perlman. The catalyst for TRILL was an event at Beth Israel Deaconess Medical Center which began on 13 November 2002. The concept of Rbridges [sic] was first proposed to the Institute of Electrical and Electronics Engineers in 2004, who in 2005 rejected what came to be known as TRILL, and in 2006 through 2012 devised an incompatible variation known as Shortest Path Bridging.

Back to article

Article summary

TRILL (Transparent Interconnection of Lots of Links) is a networking protocol for optimizing bandwidth and resilience in Ethernet networks, implemented by devices called TRILL switches. TRILL combines techniques from bridging and routing, and is the application of link-state routing to the VLAN-aware customer-bridging problem. Routing bridges (RBridges) are compatible with, and can incrementally replace, previous IEEE 802.1 customer bridges. TRILL Switches are also compatible with IPv4 and IPv6, routers and end systems. They are invisible to current IP routers, and like conventional routers, RBridges terminate the broadcast, unknown-unicast and multicast traffic of DIX Ethernet and the frames of IEEE 802.2 LLC including the bridge protocol data units of the Spanning Tree Protocol. TRILL was designed as a successor to the Spanning Tree Protocol, both having been created by the same person, Radia Perlman. The catalyst for TRILL was an event at Beth Israel Deaconess Medical Center which began on 13 November 2002. The concept of Rbridges [sic] was first proposed to the Institute of Electrical and Electronics Engineers in 2004, who in 2005 rejected what came to be known as TRILL, and in 2006 through 2012 devised an incompatible variation known as Shortest Path Bridging.

Key claims

  1. date of birth: 1999 — source: Wikipedia, revision 1362555828, retrieved 2026-10-20 · confidence 0.95

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. The record states that the date of birth is "1999". What evidence would count against this claim?
  3. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  4. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

  1. Wikipedia, “trill”, revision 1362555828, retrieved 2026-10-20 https://en.wikipedia.org/w/index.php?oldid=1362555828

Key claims and bibliography are generated from the same tracked claims and sources as the article page.