Triode

Uses your system voice; voice and rate in settings.

Snapshot

≈ 12 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A triode is an electronic amplifying vacuum tube (or thermionic valve in British English) consisting of three electrodes inside an evacuated glass envelope: a heated filament or cathode, a grid, and a plate (anode). Developed from Lee De Forest's 1906 Audion, a partial vacuum tube that added a grid electrode to the thermionic diode (Fleming valve), the triode was the first practical electronic amplifier and the ancestor of other types of vacuum tubes such as the tetrode and pentode. Its invention helped make amplified radio technology and long-distance telephony possible. Triodes were widely used in consumer electronics devices such as radios and televisions until the 1970s, when transistors replaced them. Today, their main remaining use is in high-power RF amplifiers in radio transmitters and industrial RF heating devices. In recent years, there has been a resurgence in demand for low-power triodes due to renewed interest in tube-type audio equipment by audiophiles who prefer the sound of tube-based electronics.

A triode is an electronic amplifying vacuum tube (or thermionic valve in British English) consisting of three electrodes inside an evacuated glass envelope: a heated filament or cathode, a grid, and a plate (anode). Developed from Lee De Forest's 1906 Audion, a partial vacuum tube that added a grid electrode to the thermionic diode (Fleming valve), the triode was the first practical electronic amplifier and the ancestor of other types of vacuum tubes such as the tetrode and pentode. Its invention helped make amplified radio technology and long-distance telephony possible. Triodes were widely used in consumer electronics devices such as radios and televisions until the 1970s, when transistors replaced them. Today, their main remaining use is in high-power RF amplifiers in radio transmitters and industrial RF heating devices. In recent years, there has been a resurgence in demand for low-power triodes due to renewed interest in tube-type audio equipment by audiophiles who prefer the sound of tube-based electronics.

Precursor devices

Before thermionic valves were invented, Philipp Lenard used the principle of grid control while conducting photoelectric experiments in 1902. The first vacuum tube used in radio was the thermionic diode or Fleming valve, invented by John Ambrose Fleming in 1904 as a detector for radio receivers. It was an evacuated glass bulb containing two electrodes, a heated filament (cathode) and a plate (anode).

Invention

Triodes came about in 1906 when American engineer Lee de Forest and Austrian physicist Robert von Lieben independently patented tubes that added a third electrode, a control grid, between the filament and plate to control current. Von Lieben's partially-evacuated three-element tube, patented in March 1906, contained a trace of mercury vapor and was intended to amplify weak telephone signals. Starting in October 1906 De Forest patented a number of three-element tube designs by adding an electrode to the diode, which he called Audions, intended to be used as radio detectors. The one which became the design of the triode, in which the grid was located between the filament and plate, was patented January 29, 1907. Like the von Lieben vacuum tube, De Forest's Audions were incompletely evacuated and contained some gas at low pressure. von Lieben's vacuum tube did not see much development due to his death seven years after its invention, shortly before the outbreak of the First World War. De Forest's Audion did not see much use until its ability to amplify was recognized around 1912 by several researchers, who used it to build the first successful amplifying radio receivers and electronic oscillators. The many uses for amplification motivated its rapid development. By 1913, improved versions with higher vacuum were developed by Harold Arnold at American Telephone and Telegraph Company, which had purchased the rights to the Audion from De Forest, and Irving Langmuir at General Electric, who named his tube the "Pliotron", These were the first vacuum tube triodes. The name "triode" appeared later, when it became necessary to distinguish it from other kinds of vacuum tubes with more or fewer elements (diodes, tetrodes, pentodes, etc.). There were lengthy lawsuits between De Forest and von Lieben, and De Forest and the Marconi Company, who represented John Ambrose Fleming, the inventor of the diode.

Wider adoption

The discovery of the triode's amplifying ability in 1912 revolutionized electrical technology, creating the new field of electronics, the technology of active (amplifying) electrical devices. The triode was immediately applied to many areas of communication. During World War I, AM voice two-way radio sets were made possible in 1917 (see TM (triode)), which were simple enough that the pilot in a single-seat aircraft could use it while flying. Triode "continuous wave" radio transmitters replaced the cumbersome inefficient "damped wave" spark-gap transmitters, allowing the transmission of sound by amplitude modulation (AM). Amplifying triode radio receivers, which had the power to drive loudspeakers, replaced weak crystal radios, which had to be listened to with earphones, allowing families to listen together. This resulted in the evolution of radio from a commercial message service to the first mass communication medium, with the beginning of radio broadcasting around 1920. Triodes made transcontinental telephone service possible. Vacuum tube triode repeaters, invented at Bell Telephone after its purchase of the Audion rights, allowed telephone calls to travel beyond the unamplified limit of about 800 miles. The opening by Bell of the first transcontinental telephone line was celebrated 3 years later, on January 25, 1915. Other inventions made possible by the triode were television, public address systems, electric phonographs, and talking motion pictures. The triode served as the technological base from which later vacuum tubes developed, such as the tetrode (Walter Schottky, 1916) and pentode (Gilles Holst and Bernardus Dominicus Hubertus Tellegen, 1926), which remedied some of the shortcomings of the triode detailed below. The triode was very widely used in consumer electronics such as radios, televisions, and audio equipment until it was replaced in the 1960s by the transistor, invented in 1947, which brought the "vacuum tube era" introduced by the triode to a close. Today, triodes are used mostly in high-power applications for which solid-state semiconductor devices are unsuitable, such as radio transmitters and industrial heating equipment. However, more recently the triode and other vacuum tube devices have been experiencing a resurgence and comeback in high-fidelity audio and musical equipment. They also remain in use as vacuum fluorescent displays (VFDs), which come in a variety of implementations but all are essentially triode devices. I_p = k (E_g + {E_p \over \mu})^{3 \over 2} where \mu is the amplification factor and k is a constant determined by tube geometry. In this formulation, the triode behaves analogously to a diode whose effective accelerating potential is E_g + {E_p \over \mu} The grid voltage thus enters the current law in the same manner as plate voltage, but multiplied by the factor \mu . This relation accounts for the similarity and displacement of the plate-characteristic curves. A change in plate voltage produces the same effect on plate current as a change in grid voltage equal to {E_p \over mu} . The amplification factor \mu therefore represents the relative effectiveness of grid voltage compared with plate voltage in controlling current. Since \mu is ordinarily large, a small variation of grid voltage produces the same change in plate current as a much larger variation of plate voltage. Characteristic curves showing plate current as a function of plate voltage for several grid voltages illustrate this relation. A comparatively small variation of grid voltage is thus capable of controlling a substantially larger plate current, making voltage and power amplification possible. The grid and plate also form an interelectrode capacitance. Variations of plate voltage may therefore couple back to the grid, an effect which can introduce instability or oscillation at high frequencies unless suitable circuit measures are employed, such as in the neutrodyne. Va = V+ − IaRa or equivalently: Ia = (V+ − Va) / Ra When plotted on the same axes as the characteristic curves (Ia versus Va), this equation forms a straight line known as the DC load line. It is defined by two intercepts: If Ia = 0, then Va = V+ If Va = 0, then Ia = V+ / Ra A straight line joining these points represents all combinations of plate voltage and current consistent with the external circuit. The quiescent operating point (Q-point) is located where this line intersects the curve corresponding to the chosen grid bias. As described by Frederick Emmons Terman, when an alternating signal is applied to the grid, the instantaneous operating point moves along the load line. The intersections of the load line with adjacent grid-voltage curves determine the corresponding changes in plate current and voltage. In this way, voltage gain, current swing, and the limits of undistorted operation may be estimated graphically. For example, consider an ECC83 triode biased at Va = 200 V and Vg = −1 V. From the characteristic curves, this corresponds to an anode current of approximately 2.2 mA. With an anode load resistor Ra = 10 kΩ, the voltage drop across the resistor is 22 V at this current, requiring a supply voltage of approximately V+ = 222 V to establish the operating point. If a 1 V peak-to-peak signal is applied about the −1 V bias (so that Vg varies between −0.5 V and −1.5 V), the operating point moves along the load line: At Vg = −0.5 V, Ia ≈ 3.1 mA and Va ≈ 191 V At Vg = −1.5 V, Ia ≈ 1.4 mA and Va ≈ 208 V Thus a 1 V peak-to-peak input produces approximately 17 V peak-to-peak at the anode, corresponding to a voltage gain of about 17 under these conditions. In addition to graphical load-line analysis, the intrinsic amplification capability of a triode is described by its amplification factor, μ. As defined by Terman, μ is the ratio of a change in plate voltage to the corresponding change in grid voltage required to keep plate current constant: μ = (∂Va / ∂Vg) at constant Ia Geometrically, this may be determined from the characteristic curves by moving along a horizontal line (constant plate current) and comparing the spacing of adjacent grid-voltage curves. For the ECC83, μ is approximately 100. This value is a property of the tube itself and is independent of the external load. The slope of the load line determines how variations in grid voltage are translated into changes in current and voltage. A smaller load resistance produces greater current variation but reduced voltage swing. A larger load resistance produces greater voltage swing but smaller current variation. If the anode is connected to an ideal constant-current load, the load line becomes horizontal, since plate current is constrained while plate voltage is free to vary. In this case, small changes in grid voltage primarily produce changes in plate voltage, increasing available voltage gain. The graphical load-line method may also be used to determine the maximum undistorted power output obtainable from a triode amplifier operating in Class A, as described in the RCA Receiving Tube Manual (RC-26, 1968). After drawing the DC load line and locating the quiescent operating point, the allowable signal swing is determined by the points where the load line reaches limiting regions of operation (cutoff at low current and saturation or grid-current region at high current). For Class A operation, the bias point is typically chosen to permit approximately symmetrical voltage swing about the quiescent value in order to obtain maximum undistorted output. From the graph: Vpp = Va,max − Va,min Vrms = Vpp / (2√2) Po = Vrms² / Rload The load governing signal swing is the effective AC load presented to the plate. This need not be identical to the DC load establishing the operating point. In transformer-coupled stages, the AC load is the reflected impedance of the secondary load: Rreflected = (Np / Ns)² × RL where Np/Ns is the transformer turns ratio and RL is the secondary load resistance. By appropriate choice of load resistance or transformer ratio, the load line may be positioned to obtain maximum symmetrical swing and therefore maximum Class A output power. The load-line method may be extended to push–pull amplifiers by forming composite plate characteristics for the two tubes. As shown by B. J. Thompson, the plate-current–plate-voltage characteristics of one tube are inverted and combined algebraically with those of the other, taking account of the 180° phase relation of the applied voltages. The resulting composite characteristics represent the effective plate-to-plate current as a function of plate voltage for the pair. A load line is drawn through the operating point on these composite curves in the usual manner. The effective plate-to-plate load resistance is four times the resistance connected across a secondary having the same number of turns as one half of the primary. Power output, average plate current, and distortion may then be determined graphically as for a single tube.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378477164 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

30 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.