TS-50 mine

which looks very similar to the TS-50.

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

which looks very similar to the TS-50. The primary visual difference is that the VS-50 usually features a black rubber pressure plate (TS-50's pressure plate is usually body coloured, and is stamped TS-50) but the key identifier is the horizontal indexing tabs off the vertical fins visible in the left and far right side of the mine in the picture.]]

The TS-50 is a diameter circular Italian blast resistant minimum metal anti-personnel mine designed and produced by Valsella Meccanotecnica (Italy).

Description

The mine has a ribbed plastic case which is olive green, brown or sand colored. The mine has a central raised pressure pad on the top surface of the mine, but is designed to operate even with the mine upside down. Pressure on the mine forces air through a diaphragm into a small rubber air bag, which inflates.

As the bag inflates it pushes a shutter, which in turn removes the striker retaining lug. The striker is free to impact the detonator. The mine requires a constant pressure of approximately 2 to 5 kg (5 to 11 lbs) for an average of 0.11 seconds before the fuze will detonate.

This allows the mine to be laid in a high density pattern without the shock of a detonation impacting the nearby mines. The design of the TS-50's fuze gives it a large degree of resistance to explosive overpressure clearance techniques, because the short sharp shock from an explosion does not last long enough to force enough air into the air bag to trigger the mine.

This feature, combined with the use of non-magnetic metals used in the mine, make it difficult to clear using conventional techniques. A metal "detector" disc is provided with the mine to make it more detectable, however it is rarely used. The mine is waterproof and can be used in shallow water.

The mine can be either laid by hand or scattered by helicopter from a dispenser system.

Production

The mine was originally produced by Tecnovar italiana SpA, and was in service with the Italian army. When the anti-personnel mine ban came into force the Italian army destroyed all its stocks of the mine. It is very similar to another Italian mine, the VS-50.

TS-50 mines were widely exported and also were produced under licence in Egypt. Uncleared minefields containing TS-50 mines are located in Afghanistan, Azerbaijan, Ecuador, Georgia, Kurdistan, Kuwait, Iraq, Lebanon, Rwanda and the Western Sahara.

Designations

T/79 – Egyptian army designation for a locally produced version of the TS-50 mine. More than 1.2 million T/79s have been produced. Most T/79 landmines were assembled by Egyptian factories, using a combination of imported Italian parts and locally manufactured components. YM-1 – designation for an Iranian copy of the TS-50 mine.

Specifications

Diameter: 90mm Height: 45mm Weight: 185 grams Explosive content: 50 grams of Composition B Operating pressure: 12.5 kg

References

Brassey's Essential Guide to Anti-personnel landmines, Eddie Banks. Jane's Mines and Mine Clearance 2005–2006

Text derived from https://en.wikipedia.org/w/index.php?oldid=1327126434 under CC BY-SA 4.0; modifications have been made.

Words in each sectionDescriptionDescriptionDescription: 246 words246ProductionProductionProduction: 79 words79DesignationsDesignationsDesignations: 54 words54SpecificationsSpecificationsSpecifications: 19 words19
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001327126434 · captured 2025-12-12 · ledger · version history

Cite this page as: encyclopegia.org, “TS-50 mine”, snapshot enwiki-001327126434. https://encyclopegia.org/a/ts-50-mine

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.