Lesson plan

ttcp

The program ttcp (Test TCP) is a utility for measuring network throughput, popular on Unix systems. It measures the network throughput between two systems using the TCP or optionally UDP protocols. It was written by Mike Muuss and Terry Slattery at BRL sometime before December 1984, to compare the performance of TCP stacks by the Computer Systems Research Group (CSRG) of the University of California, Berkeley and Bolt, Beranek and Newman (BBN) to help DARPA decide which version to place in 4.3BSD. Many compatible implementations and derivatives exist including the widely used Iperf. Testing can be done from any platform to any other platform, for example from a Windows machine to a Linux machine, as long as they both have a ttcp application installed. For normal use, ttcp is installed on two machines – one will be the sender, the other the receiver. The receiver is started first and waits for a connection. Once the two connect, the sending machine sends data to the receiver and displays the overall throughput of the network they traverse. The amount of data sent and other options are configurable through command line parameters.…

Back to article

Article summary

The program ttcp (Test TCP) is a utility for measuring network throughput, popular on Unix systems. It measures the network throughput between two systems using the TCP or optionally UDP protocols. It was written by Mike Muuss and Terry Slattery at BRL sometime before December 1984, to compare the performance of TCP stacks by the Computer Systems Research Group (CSRG) of the University of California, Berkeley and Bolt, Beranek and Newman (BBN) to help DARPA decide which version to place in 4.3BSD. Many compatible implementations and derivatives exist including the widely used Iperf. Testing can be done from any platform to any other platform, for example from a Windows machine to a Linux machine, as long as they both have a ttcp application installed. For normal use, ttcp is installed on two machines – one will be the sender, the other the receiver. The receiver is started first and waits for a connection. Once the two connect, the sending machine sends data to the receiver and displays the overall throughput of the network they traverse. The amount of data sent and other options are configurable through command line parameters.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.