TTEthernet
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Time-Triggered Ethernet (SAE AS6802) (also known as TTEthernet or TTE) standard defines a fault-tolerant synchronization strategy for building and maintaining synchronized time in Ethernet networks, and outlines mechanisms required for synchronous time-triggered packet switching for critical integrated applications and integrated modular avionics (IMA) architectures. SAE International released SAE AS6802 in November 20111. Time-Triggered Ethernet network devices are Ethernet devices which at least implement: * SAE AS6802 synchronization services for advanced integrated architectures, fail-operational and safety-critical systems * time-triggered traffic flow control with traffic scheduling * per-flow policing of packet timing for time-triggered traffic * robust internal architecture with traffic partitioning TTEthernet network devices are standard Ethernet devices with additional capability to configure and establish robust synchronization, synchronous packet switching, traffic scheduling and bandwidth partitioning, as described in SAE AS6802. If no time-triggered traffic capability is configured or used, it operates as full duplex switched Ethernet devices compliant with IEEE802.3 and IEEE802.1 standards. In addition, such network devices implement other deterministic traffic classes to enable mixed-criticality Ethernet networking.…
The Time-Triggered Ethernet (SAE AS6802) (also known as TTEthernet or TTE) standard defines a fault-tolerant synchronization strategy for building and maintaining synchronized time in Ethernet networks, and outlines mechanisms required for synchronous time-triggered packet switching for critical integrated applications and integrated modular avionics (IMA) architectures. SAE International released SAE AS6802 in November 2011. Time-Triggered Ethernet network devices are Ethernet devices which at least implement: SAE AS6802 synchronization services for advanced integrated architectures, fail-operational and safety-critical systems time-triggered traffic flow control with traffic scheduling per-flow policing of packet timing for time-triggered traffic robust internal architecture with traffic partitioning TTEthernet network devices are standard Ethernet devices with additional capability to configure and establish robust synchronization, synchronous packet switching, traffic scheduling and bandwidth partitioning, as described in SAE AS6802. If no time-triggered traffic capability is configured or used, it operates as full duplex switched Ethernet devices compliant with IEEE802.3 and IEEE802.1 standards. In addition, such network devices implement other deterministic traffic classes to enable mixed-criticality Ethernet networking. Therefore, TTEthernet networks are designed to host different Ethernet traffic classes without interference. TTEthernet device implementation expands standard Ethernet with services to meet time-critical, deterministic or safety-relevant requirements in double- and triple-redundant configurations for advanced integrated systems. TTEthernet switching devices are used for integrated systems and safety-related applications primarily in the aerospace, industrial controls and automotive applications. TTEthernet has been selected by NASA and ESA as the technology for communications between the Orion MPCV and the European Service Module, and is described by the ESA as being "prime choice for future launchers allowing them to deploy distributed modular avionics concepts". It has also been selected as the backbone network for NASA's Lunar Gateway to which ESA is a key stakeholder. As an increasingly used network architecture in the space industry, European Cooperation for Space Standardization published ECSS-E-ST-50-16C on September 30, 2021.
Description
TTEthernet network devices implement OSI Layer 2 services, and therefore it claims to be compatible with IEEE 802.3 standards and coexist with other Ethernet networks and services or traffic classes, such as IEEE 802.1Q, on the same device. Three traffic classes and message types are provided in current TTEthernet switch implementations: Synchronization Traffic (Protocol Control Frames - PCF): Time-Triggered Ethernet network uses protocol control frames (PCFs) to establish and maintain synchronization. The PCFs traffic has the highest priority and it is similar to rate-constrained traffic. PCF traffic establishes a well-defined interface for fault-tolerant clock synchronization algorithms. Time-triggered traffic: Ethernet packets are sent over the network at predefined (scheduled) times and take precedence over all other traffic types. The occurrence, temporal delay and precision of time-triggered messages are predefined and guaranteed. Also, "synchronized local clocks are the fundamental prerequisite for time-triggered communication". Rate-constrained traffic: Ethernet packets are configured so that they can keep maximum latency and jitter in a closed system. They are used for applications with less stringent determinism and real-time requirements. This traffic class guarantees that bandwidth is predefined for each application and delays and temporal deviations have defined upper bounds. Best-effort traffic (incl. VLAN traffic): Packets are sent via FIFO queues to egress ports. There is no absolute guarantee whether and when these messages can be transmitted, what delays occur and if messages arrive at the recipient. Best-effort messages use the remaining bandwidth of the network and have lower priority than the other two types. Three traffic classes cover different types of determinism - from soft-time best-effort traffic to "more deterministic" to "very deterministic" (max.latency defined per VL) to "strictly deterministic" (fixed latency, μs-jitter), thus creating a deterministic unified Ethernet networking technology. While standard full duplex switched Ethernet is typically best effort or more deterministic, time-triggered traffic is bound only to the system time progression and traffic scheduling, and not to priorities. It can be considered the highest priority traffic, above the highest priority 802.1Q VLAN traffic.
See also
Computer networking Computer science Time-Triggered Protocol Real-time computing
Notes
External links
AS6802: Time-Triggered Ethernet www.tttech.com/ttethernet - TTTech Computertechnik AG realtime-ethernet.de - Comparison of realtime-ethernet solutions Explanations partly German, partly English NASA and TTTech partner on space network standards for network centric space operations Military & Aerospace Electronics magazine on TTEthernet
Text derived from https://en.wikipedia.org/w/index.php?oldid=1234268524 under CC BY-SA 4.0; modifications have been made.
References
1 claim could not be tied to a specific sentence and is listed in the table below instead.