Two half-hitches

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Two half-hitches is a type of knot, specifically a binding knot or hitch knot. One variety consists of an overhand knot tied around a post, followed by a half-hitch. This knot is less often referred to as a clove hitch over itself, double half-hitch, or full-hitch.

The following three-step process for tying the two half-hitches is also explained in the image gallery below. Click on the images for high-resolution versions. # Begin by forming a clockwise loop around the pole, with the working end of the rope on top. Bring the working end through the loop.

At this point, you have an overhand knot around the pole. #Bring the working end down and to the left. Loop it under the standing end. Pull the working end through the loop just formed, tighten, and slide the knot along the standing end up to the post. #A correctly tied two half-hitches resembles a clove hitch tied around the standing end of the line, not a cow hitch.

Image:Two half hitches 1.jpg|Step 1: Form a single half-hitch, or overhand knot Image:Two half hitches 2.jpg|Step 2: Form a second half-hitch above the first Image:Two half hitches 3.jpg|Step 3: Tighten To release the knot, pry apart the two hitches with a bending motion. However, it can often be difficult to untie.…

Two half-hitches is a type of knot, specifically a binding knot or hitch knot. One variety consists of an overhand knot tied around a post, followed by a half-hitch. This knot is less often referred to as a clove hitch over itself, double half-hitch, or full-hitch.

The following three-step process for tying the two half-hitches is also explained in the image gallery below. Click on the images for high-resolution versions. Begin by forming a clockwise loop around the pole, with the working end of the rope on top.

Bring the working end through the loop. At this point, you have an overhand knot around the pole. Bring the working end down and to the left.

Loop it under the standing end. Pull the working end through the loop just formed, tighten, and slide the knot along the standing end up to the post. A correctly tied two half-hitches resembles a clove hitch tied around the standing end of the line, not a cow hitch.

Image:Two half hitches 1.jpg|Step 1: Form a single half-hitch, or overhand knot Image:Two half hitches 2.jpg|Step 2: Form a second half-hitch above the first Image:Two half hitches 3.jpg|Step 3: Tighten To release the knot, pry apart the two hitches with a bending motion. However, it can often be difficult to untie.

To help avoid this problem, tie a slipped variation: in the second half-hitch, pass through a bight, as when tying your shoe, rather than the entire free end. Ashley Lesson #1781 has quotations on using two half-hitches for safety: "Two half hitches will never slip"—Admiral Luce. "Two half hitches saved a Queen's Ship"—Anonymous.

"Three half hitches are more than a King's Yacht wants"—Admiral Smyth.

See also

List of hitch knots List of knots

Roper's Knots de:Rundtörn mit zwei halben Schlägen

Text derived from https://en.wikipedia.org/w/index.php?oldid=1241282454 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001241282454 · captured 1724143599.0 · version history

Cite this page as: encyclopegia.org, “Two half-hitches”, snapshot enwiki-001241282454. https://encyclopegia.org/a/two-half-hitches

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.