Type 99 mine

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Type 99 (Hako-Baku-Rai) mine was a Japanese anti-tank weapon used during the Second World War. It entered service in 1939. Four magnets were attached to the casing made of hemp cloth, along with an external fuze. The fuze had a time delay, which enabled it to be used as an anti-tank hand grenade, or a demolition charge. Once the safety pin was removed, it was armed, striking the fuze ignited a powder delay train. The mine detonated after a five to ten seconds delay, giving enough time for it to be thrown.

The mines could be stacked, held together by the magnets for greater effect. When used individually the mine could penetrate approximately 0.75 inches (19 mm) of steel, with two mines stacked it can penetrate 1.25 inches (32 mm) of steel. Burma-based British forces carried out tests of captured Type 99 mines on Stuart and Lee tanks and found the mine to be extremely effective against armor of 20 mm or less but largely ineffective against armor of 35 mm or higher.

Japanese doctrine called for infantry, usually hiding along the side of the road, to throw the Type 99 mine against horizontal surfaces at a distance of 2 to 3 meters. Usually infantry would emplace the mine on top metallic surfaces, such as a tank engine deck

The Type 99 (Hako-Baku-Rai) mine was a Japanese anti-tank weapon used during the Second World War. It entered service in 1939. Four magnets were attached to the casing made of hemp cloth, along with an external fuze. The fuze had a time delay, which enabled it to be used as an anti-tank hand grenade, or a demolition charge. Once the safety pin was removed, it was armed, striking the fuze ignited a powder delay train. The mine detonated after a five to ten seconds delay, giving enough time for it to be thrown.

The mines could be stacked, held together by the magnets for greater effect. When used individually the mine could penetrate approximately 0.75 inches (19 mm) of steel, with two mines stacked it can penetrate 1.25 inches (32 mm) of steel. Burma-based British forces carried out tests of captured Type 99 mines on Stuart and Lee tanks and found the mine to be extremely effective against armor of 20 mm or less but largely ineffective against armor of 35 mm or higher.

Japanese doctrine called for infantry, usually hiding along the side of the road, to throw the Type 99 mine against horizontal surfaces at a distance of 2 to 3 meters. Usually infantry would emplace the mine on top metallic surfaces, such as a tank engine deck

Specifications

Length of fuse:

References

https://web.archive.org/web/20050219144251/http://www.ibiblio.org/hyperwar/Japan/IJA/HB/HB-9-2.html http://www.inert-ord.net/jap02h/grenades/t99mag/index.html

Text derived from https://en.wikipedia.org/w/index.php?oldid=1321074620 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.