Lesson plan

Type approval

Type approval or certificate of conformity is granted to a product that meets a minimum set of regulatory, technical and safety requirements. Generally, type approval is required before a product is allowed to be sold in a particular country, so the requirements for a given product will vary around the world. Processes and certifications known as type approval in English are often called homologation, or some cognate expression, in other European languages. Compliance with type approval requirements can be denoted by a third-party marking on the back of the product (e.g. ABS, TÜV, UL, CSA, KIWA), or by a type-approval certificate obtained by a manufacturer and kept on file. The CE mark found on the back of many electronic devices does not mean that the product has obtained type approval in the European Union. The CE mark is the manufacturer's declaration that the system/assembly meets the minimum safety requirements of all the directives (laws) applicable to it, and of itself, does not signify any third party involvement in the design or testing of a system/assembly. Many of the New Approach safety directives do not mandate third party involvement at all (e.g. LVD, EMD), and the ones that do (e.g. PED, MDD, ATEX) only require notified body (NoBo) involvement above a certain degree of risk category.…

Back to article

Article summary

Type approval or certificate of conformity is granted to a product that meets a minimum set of regulatory, technical and safety requirements. Generally, type approval is required before a product is allowed to be sold in a particular country, so the requirements for a given product will vary around the world. Processes and certifications known as type approval in English are often called homologation, or some cognate expression, in other European languages. Compliance with type approval requirements can be denoted by a third-party marking on the back of the product (e.g. ABS, TÜV, UL, CSA, KIWA), or by a type-approval certificate obtained by a manufacturer and kept on file. The CE mark found on the back of many electronic devices does not mean that the product has obtained type approval in the European Union. The CE mark is the manufacturer's declaration that the system/assembly meets the minimum safety requirements of all the directives (laws) applicable to it, and of itself, does not signify any third party involvement in the design or testing of a system/assembly. Many of the New Approach safety directives do not mandate third party involvement at all (e.g. LVD, EMD), and the ones that do (e.g. PED, MDD, ATEX) only require notified body (NoBo) involvement above a certain degree of risk category.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.