Type-in program

MLX type-in program code as printed in a Compute!'s Gazette magazine A type-in program or type-in listing was computer source code printed in a home computer magazine or book.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

MLX type-in program code as printed in a Compute!'s Gazette magazine A type-in program or type-in listing was computer source code printed in a home computer magazine or book. It was meant to be entered via the keyboard by the reader and then saved to cassette tape or floppy disk. The result was a usable game, utility, or application program.

Type-in programs were common in the home computer era from the late 1970s through the early 1990s, when the RAM of 8-bit systems was measured in kilobytes and most computer owners did not have access to networks such as bulletin board systems. Magazines such as Softalk, Compute!, ANALOG Computing, and Ahoy! dedicated much of each issue to type-in programs.

The magazines could contain multiple games or other programs for a fraction of the cost of purchasing commercial software on removable media, but the user had to spend up to several hours typing each one in. Most listings were either in a system-specific BASIC dialect or machine code.

Machine code programs were long lists of decimal or hexadecimal numbers, often in the form of DATA statements in BASIC. Most magazines had error checking software to make sure a program was typed correctly. Type-in programs did not carry over to 16-bit computers such as the Amiga and Atari ST in a significant way, as both programs and data (such as graphics) became much larger.…

MLX type-in program code as printed in a Compute!'s Gazette magazine]] A type-in program or type-in listing was computer source code printed in a home computer magazine or book. It was meant to be entered via the keyboard by the reader and then saved to cassette tape or floppy disk. The result was a usable game, utility, or application program.

Type-in programs were common in the home computer era from the late 1970s through the early 1990s, when the RAM of 8-bit systems was measured in kilobytes and most computer owners did not have access to networks such as bulletin board systems. Magazines such as Softalk, Compute!, ANALOG Computing, and Ahoy! dedicated much of each issue to type-in programs.

The magazines could contain multiple games or other programs for a fraction of the cost of purchasing commercial software on removable media, but the user had to spend up to several hours typing each one in. Most listings were either in a system-specific BASIC dialect or machine code.

Machine code programs were long lists of decimal or hexadecimal numbers, often in the form of DATA statements in BASIC. Most magazines had error checking software to make sure a program was typed correctly. Type-in programs did not carry over to 16-bit computers such as the Amiga and Atari ST in a significant way, as both programs and data (such as graphics) became much larger.

It became common to include a covermount 3 -inch floppy disk or CD-ROM with each issue of a magazine.

Validation software

To prevent errors when typing in listings, most publications provided short programs to verify that code was entered correctly. These were specific to a magazine or family of magazines, and different validation programs were usually used for BASIC source and binary data.

Compute! and Compute!'s Gazette printed a short listing in each issue for The Automatic Proofreader to check BASIC programs, while ANALOG Computing used D:CHECK (for disk) and C:CHECK (for cassette tape). For binary listings, Compute! and Ahoy! provided MLX and Flankspeed respectively, which were both interactive programs for entering data.

The MIKBUG machine code monitor for the Motorola 6800 of the late 1970s incorporated a checksum into its hexadecimal program listings. ANALOG Computing presented machine code programs as BASIC DATA statements, then prepended a short program to compute checksums. Running the program output a list of values to be checked against those printed in the magazine.

Upon successful validation, the program was saved as a binary file and the BASIC code no longer needed.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375245414 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

10 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.