UA3 experiment

The Underground Area 3 (UA3) experiment was a high-energy physics experiment at the Proton-Antiproton Collider (Sp S), a modification of the Super Proton Synchrotron (SPS), at CERN.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Underground Area 3 (UA3) experiment was a high-energy physics experiment at the Proton-Antiproton Collider (Sp S), a modification of the Super Proton Synchrotron (SPS), at CERN. The experiment ran from 1978 to 1988 with the objective of searching for magnetic monopoles. No evidence for magnetic monopoles was found by the UA3 experiment.

The experiment shares the same intersection region used as the UA1 colliding experiment, and looked for expected high ionisation of magnetic monopole in plastic detectors. The beam pipe was a stainless steel corrugated cylinder, with 0.2 mm thickness.

Plastic detectors were used as they are best suited to the chemically etched tracks left by the ionising particles, and they resist high temperatures during baking. The plastic detectors used were 125μm thick kapton foils. The foils were placed inside of the vacuum chamber and around the central track detector for the UA1.

Three cylindrical and four transverse layers of detectors were placed between three chambers: two forward chambers and a central chamber. This covered the maximum solid angle possible. Holes etched along a monopole track were determined using diffusion of a gas or dye through the holes, followed by a chemical reaction.

The ionisation rates of magnetic monopoles were predicted to be very high due to their short range.

The Underground Area 3 (UA3) experiment was a high-energy physics experiment at the Proton-Antiproton Collider (Sp S), a modification of the Super Proton Synchrotron (SPS), at CERN. The experiment ran from 1978 to 1988 with the objective of searching for magnetic monopoles. No evidence for magnetic monopoles was found by the UA3 experiment.

The experiment shares the same intersection region used as the UA1 colliding experiment, and looked for expected high ionisation of magnetic monopole in plastic detectors. The beam pipe was a stainless steel corrugated cylinder, with 0.2 mm thickness.

Plastic detectors were used as they are best suited to the chemically etched tracks left by the ionising particles, and they resist high temperatures during baking. The plastic detectors used were 125μm thick kapton foils. The foils were placed inside of the vacuum chamber and around the central track detector for the UA1.

Three cylindrical and four transverse layers of detectors were placed between three chambers: two forward chambers and a central chamber. This covered the maximum solid angle possible. Holes etched along a monopole track were determined using diffusion of a gas or dye through the holes, followed by a chemical reaction.

The ionisation rates of magnetic monopoles were predicted to be very high due to their short range. CERN's Greybook for the UA3 experiment

Text derived from https://en.wikipedia.org/w/index.php?oldid=1360744036 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001360744036 · captured 1782198978.0 · version history

Cite this page as: encyclopegia.org, “UA3 experiment”, snapshot enwiki-001360744036. https://encyclopegia.org/a/ua3-experiment

Sources cited in this revision

6 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.