Lesson plan
UIMID
A UIMID (user identity module identifier) is a 32-bit Electronic Serial Number (ESN) stored in a R-UIM or CSIM ('smart card') used for TDMA or CDMA2000 phones (mainly the latter). It is given a different name to avoid confusion with the hardware ESN stored in the phone. In all known systems the UIMID displaces the ESN in signaling (based on setting bit 1 of the 'UsgInd' field to '1' in the card). Because the UIMID is allocated from the same numbering space as ESN its existence is transparent to the network. The reason the UIMID is transmitted instead of the ESN is because the card contains the MIN or IMSI and devices such as the HLR running the Asbi mobility management protocol insist on a static association between these identifiers for subscription validation. The HLR will store the MIN or IMSI alongside the ESN in each record, and if an ANSI-41 message is received containing a different pair it will be rejected as invalid. UIMID codes are allocated by the TIA using industry-defined guidelines and with codes that have been transferred from the ESN administrator (also the TIA). ESN and UIMID codes were exhausted by late 2008 at which point only reclaimed codes could be assigned to manufacturers including portions of blocks assigned to manufacturers but never used and portions used for technologies other than CDMA2000.…
Article summary
A UIMID (user identity module identifier) is a 32-bit Electronic Serial Number (ESN) stored in a R-UIM or CSIM ('smart card') used for TDMA or CDMA2000 phones (mainly the latter). It is given a different name to avoid confusion with the hardware ESN stored in the phone. In all known systems the UIMID displaces the ESN in signaling (based on setting bit 1 of the 'UsgInd' field to '1' in the card). Because the UIMID is allocated from the same numbering space as ESN its existence is transparent to the network. The reason the UIMID is transmitted instead of the ESN is because the card contains the MIN or IMSI and devices such as the HLR running the Asbi mobility management protocol insist on a static association between these identifiers for subscription validation. The HLR will store the MIN or IMSI alongside the ESN in each record, and if an ANSI-41 message is received containing a different pair it will be rejected as invalid. UIMID codes are allocated by the TIA using industry-defined guidelines and with codes that have been transferred from the ESN administrator (also the TIA). ESN and UIMID codes were exhausted by late 2008 at which point only reclaimed codes could be assigned to manufacturers including portions of blocks assigned to manufacturers but never used and portions used for technologies other than CDMA2000.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.