Ultimaker

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Ultimaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US. They make fused filament fabrication 3D printers, develop 3D printing software, and sell branded 3D printing materials. Their product line includes the Ultimaker S5 and S3, Ultimaker 3 series, Ultimaker 2+ series and Ultimaker Original+. These products are used by industries such as automotive, architecture, healthcare, education, and small scale manufacturing.

Ultimaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US. They make fused filament fabrication 3D printers, develop 3D printing software, and sell branded 3D printing materials. Their product line includes the Ultimaker S5 and S3, Ultimaker 3 series, Ultimaker 2+ series and Ultimaker Original+. These products are used by industries such as automotive, architecture, healthcare, education, and small scale manufacturing.

History

Ultimaker BV is a Dutch 3D printer company that was founded in 20111 by Martijn Elserman, Erik de Bruijn, and Siert Wijnia. Ultimaker started selling their products in May 2011. The company's foundation was laid at ProtoSpace Utrecht where Wijnia organized two workshops to build the RepRap Darwin 3D printer. Two Beta-workshops were organized at ProtoSpace Utrecht starting in September and December 2010, each consisting of 10 Monday evenings. Erik de Bruijn and Martijn Elserman assisted at those workshops. Frustration from their inability to get the Darwin design to work led to the inspiration to create their own design. Instead of sticking to the RepRap principle that their printer should be able to print its own parts, they designed their printer to be built mostly of laser cut plywood parts, that could be produced orders of magnitude faster than printed parts at the time. Their first prototypes bore the name "Ultimaker protobox" but newer prototypes were just titled "Ultimaker". In March 2011, Ultimaker ltd. released their first complete product, the "Ultimaker" (renamed in 20131 to "Ultimaker Original") under a Creative Commons BY-NC license. The Ultimaker Original was distributed as a Do It Yourself kit that hobbyists and technicians assembled themselves. It could print objects up to 210 mm x 210 mm x 205 mm at a maximum resolution of 20 microns.

Printers

Ultimaker Original

The Ultimaker Original is the predecessor of the Ultimaker 2 and was released only a few months after the company was founded. The Ultimaker Original is sold as a kit containing laser-cut wood and technical components. The printer must be assembled by the user and is thus able to be tailored to the user's preference and modified to their will. In 2012, the Ultimaker Original was awarded Fastest and Most Accurate 3D printer available by MAKE Magazine.

Ultimaker Original+

The Ultimaker Original+ is the main successor to the Ultimaker Original. It has an upgraded 24V power supply and heated build plate, however, it is not compatible with dual extrusion due to the limitations of the power supply.

Ultimaker 2

The Ultimaker 2 is Ultimaker's first out-of-the-box 3D printer. After transportation, the user must calibrate the build plate and insert filament before printing. The Ultimaker 2 was released in 2013 and laid the foundations for a further two printers to be added to the family before it was upgraded in 2015. Like the rest of the family, it uses an SD card to print and an LCD screen and rotary wheel to navigate through its menus. The Ultimaker 2 is also single extrusion only.

Add-ons

Dual Extrusion Pack

As the Ultimaker Original had to be assembled by the user, it was extensively modified and tinkered with. Many people added a second nozzle to the printer, allowing for dual extrusion. For a brief period of time, Ultimaker themselves sold a Dual Extrusion Pack, allowing users to have dual extrusion without having to experiment extensively.

Specifications

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1362660879 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Ultimaker” revision 1362660879 · retrieved 2026-10-20 release date (×3) · confidence 0.95 revision URL