Lesson plan

Ultimate 20

The Ultimate 20 is a one design keelboat built in the United States starting in 1994 in California by Moore Sailboats, which built the first 35 boats. Santa Cruz Yachts then built about 20 more, before production was assumed by Ultimate Sailboats until it went bankrupt. The class association then bought the molds and had the design built by Abbott Boats in Canada. After Abbott's plant was destroyed by fire in 2006, production was passed to Columbia Yachts, but few boats were completed. It was last constructed by W. D. Schock Corp, starting in the 2010s. Designed by Jim Antrim and Jeff Canepa The boat was conceived by Hobie Cat champion sailor Jeff Canepa in the late 1980s. He was interested in the work done by Doug Hemphill, the designer of the Hotfoot 20 and Hotfoot 27 sailboats and especially his desire to add a bowsprit and asymmetrical spinnaker to the Hotfoot 20. Canepa ended up buying the Hotfoot 20 molds at a sheriff's auction. In 1993 he formed Ultimate Sailboats and started to work on an evolved design. Ron Moore of Moore Sailboats built a prototype from the Hotfoot molds and it was taken on a racing tour by John McWaid, where he gathered feedback. Next naval architect Jim Antrim was enlisted to do an overhaul of the original Hotfoot 20 design. The boat was lengthened and the freeboard, mast height and beam increased.…

Back to article

Article summary

The Ultimate 20 is a one design keelboat built in the United States starting in 1994 in California by Moore Sailboats, which built the first 35 boats. Santa Cruz Yachts then built about 20 more, before production was assumed by Ultimate Sailboats until it went bankrupt. The class association then bought the molds and had the design built by Abbott Boats in Canada. After Abbott's plant was destroyed by fire in 2006, production was passed to Columbia Yachts, but few boats were completed. It was last constructed by W. D. Schock Corp, starting in the 2010s. Designed by Jim Antrim and Jeff Canepa The boat was conceived by Hobie Cat champion sailor Jeff Canepa in the late 1980s. He was interested in the work done by Doug Hemphill, the designer of the Hotfoot 20 and Hotfoot 27 sailboats and especially his desire to add a bowsprit and asymmetrical spinnaker to the Hotfoot 20. Canepa ended up buying the Hotfoot 20 molds at a sheriff's auction. In 1993 he formed Ultimate Sailboats and started to work on an evolved design. Ron Moore of Moore Sailboats built a prototype from the Hotfoot molds and it was taken on a racing tour by John McWaid, where he gathered feedback. Next naval architect Jim Antrim was enlisted to do an overhaul of the original Hotfoot 20 design. The boat was lengthened and the freeboard, mast height and beam increased.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.