Ultium
≈ 7 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
(June 2023), showing flat, underfloor battery module (between the wheels) and front and rear Ultium Drive units.|upright=1.5 Ultium is an electric vehicle battery and motor architecture developed by General Motors. It is being deployed for battery electric vehicles from General Motors portfolio brands along with vehicles from Honda and Acura. Ultium is characterized by a modular layout, using an Ultium battery to supply power to one or two Ultium Drive unit(s) using a common set of power electronics (charging, battery management system, and inverter). The high-voltage battery is composed of pouch cells that can be stacked horizontally or vertically, depending on the form factor appropriate for each vehicle, generally carried between the axles and under the floor. The traction motor(s), reduction gear, and power electronics are combined into a single Ultium Drive unit that drives the front, rear, or both axles. Three electric motor designs, sharing a common stator, are used across all planned vehicles. Ultium is used by GM's BEV3 and BT1 platforms.
(June 2023), showing flat, underfloor battery module (between the wheels) and front and rear Ultium Drive units.|upright=1.5 Ultium is an electric vehicle battery and motor architecture developed by General Motors. It is being deployed for battery electric vehicles from General Motors portfolio brands along with vehicles from Honda and Acura. Ultium is characterized by a modular layout, using an Ultium battery to supply power to one or two Ultium Drive unit(s) using a common set of power electronics (charging, battery management system, and inverter). The high-voltage battery is composed of pouch cells that can be stacked horizontally or vertically, depending on the form factor appropriate for each vehicle, generally carried between the axles and under the floor. The traction motor(s), reduction gear, and power electronics are combined into a single Ultium Drive unit that drives the front, rear, or both axles. Three electric motor designs, sharing a common stator, are used across all planned vehicles. Ultium is used by GM's BEV3 and BT1 platforms.
Design
Traction motors
Planned motors include: A front-drive permanent magnet motor A front-drive or rear-drive permanent magnet motor A all-wheel drive assist induction motor The motors are suitable for front-wheel drive, rear-wheel drive and all-wheel drive configurations. For example, the GMC Hummer EV prototype shown in March 2020 has full-time all-wheel drive and is equipped with three motors, one driving the front axle and the other two driving the rear wheels. The three traction motor types are oil-cooled and share a common stator design.
Drive units
The drive units are single-speed reduction gearboxes that accept one or two traction motors to power the wheels. The gearboxes are integrated with drivetrain electronic control modules. These modules, also known as power electronics, include the traction power inverter, onboard charging module, and accessory power module; integration of these modules into the drive units results in a combined mass that is half that of the equivalent components of the Chevrolet Bolt EV. These drive units are designed and packaged based on the intended drivetrain layout, but share many common components. The five units are: AWD 'assist' unit FWD unit RWD unit FWD/RWD unit for trucks RWD dual-motor unit for trucks For the GMC Hummer EV, the drive units provide reduction ratios of 13.3:1 and 10.5:1 for the front and rear wheels, respectively.
Chemistry
Ultium battery cells feature nickel-cobalt-manganese-aluminum (NCMA) chemistry, manufactured by Ultium Cells LLC, a joint-venture of GM and LG Energy Solution as large format pouch cells. Battery materials will be supplied by LG Chem and POSCO Chemical (cathode active materials) and Livent (lithium hydroxide). In China, Ultium-branded battery cells use nickel-manganese-cobalt (NMC) chemistry and are manufactured by CATL with cylindrical packaging. With the announcement of the joint venture with Samsung SDI for the fourth US battery plant in April 2023, prismatic and cylindrical Ultium battery cells will be produced domestically. The second-generation Chevrolet Bolt EV uses Ultium cells with lithium iron phosphate chemistry, which will reduce peak and nominal cell voltage.
Specifications
Each Ultium pouch cell measures approximately and weighs , capable of storing 0.37 kWh; the nominal voltage is 3.7 V and it is rated at 103 Ah. The gravimetric energy density of each cell is ; the corresponding volumetric energy density is . It has a 10-second gravimetric power density of 952 W/kg. For example, the total weight of the 24-module, 576-cell battery for the Hummer EV, with 212.7 kWh usable storage capacity, is . Pouches may be oriented horizontally or vertically, affording packaging flexibility. Ultium features a wireless battery management system (wBMS), the first such architecture from any automaker. The wBMS was developed in partnership with Analog Devices and contributes to reduced battery costs, as it requires 90% less wiring and reduces volume by 15%. In late January 2023, it was reported that GM was considering switching to batteries in a cylindrical cell format. This move would reduce volumetric energy density, but could reduce production time and costs.
Assembly
GM announced that cells can be assembled into modules with various configurations and demonstrated three examples: 24 cells vertically stacked, or 20 cells: 10+10 cells next to each other, each pile horizontally stacked (to reduce module width), or 12 cells: 6+6 cells next to each other, each pile horizontally stacked (to reduce module width and height). This way, multiple module sizes are possible, which could be mixed and matched for a certain application and platform. For example, when 24 cells are combined into a module, and a battery pack is made from 6 to 24 identical modules, this means the pack includes 144 to 576 cells, with a capacity ranging from 50 to 200 kWh. A 24-cell module is wired with three parallel strings of eight cells, each wired together in series, giving a nominal voltage of V per module. GM claims that they can survive repeated DC fast charging. For the GMC Hummer EV, there are two layers. At each layer, 12 modules are wired in series, creating a 400 V, 100 kWh battery layer; these two layers are then stacked and wired in parallel, yielding 200 kWh storage capacity for electric motors at the 400V level. For charging at 800V DC fast charging stations however, the two layers can be temporarily switched to be wired in series, allowing for DC fast charging at up to 800 V and 350 kW. The Cadillac Lyriq has a 12-module battery pack, essentially equivalent to a single layer of the Hummer, operating at 400 V (nominal) and capable of charging at a rate of up to 190 kW. Due to the modular nature of the battery pack, vehicles using fewer than 12 battery modules will operate at lower nominal voltages. In 2024, it was reported by InsideEVs that issues with the machines used to assemble cells into modules had resulted in delays in vehicle production during 2023; it proved to be impossible to increase production speed from 5 to 30 modules per hour per assembly line, but GM was adding module assembly lines to compensate.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378667010 under CC BY-SA 4.0; modifications have been made.