Lesson plan

Unimat

The Unimat was a series of combination machines sold for light hobbyist engineering, such as model engineering. They were distinctive as the same major components could be re-arranged into either a lathe or milling machine. It covers a range of commercially sold machines intended for machining and metalworking for model making hobbyists manufactured by the Emco company. The machines enable the user to have a drill press, lathe and milling machine. Most of the Unimat range is no longer in production, but the smallest Unimat 1 and its variants is now produced by the Cool Tool Gmbh.

Back to article

Article summary

The Unimat was a series of combination machines sold for light hobbyist engineering, such as model engineering. They were distinctive as the same major components could be re-arranged into either a lathe or milling machine. It covers a range of commercially sold machines intended for machining and metalworking for model making hobbyists manufactured by the Emco company. The machines enable the user to have a drill press, lathe and milling machine. Most of the Unimat range is no longer in production, but the smallest Unimat 1 and its variants is now produced by the Cool Tool Gmbh.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.