Lesson plan

Unimation

Unimation was the world's first robotics company. It was founded in 1962 by Joseph F. Engelberger and George Devol and was located in Danbury, Connecticut. Devol had already applied for a patent an industrial robotic arm in 1954; was issued in 1961. Devol collaborated with Engelberger, who served as president of the company, to engineer and produce an industrial robot under the brand name Unimate. They introduced their new robot in 1961 at a trade show in Chicago. The first Unimate prototypes were controlled by vacuum tubes used as digital switches though later versions used transistors. Further, parts available off-the-shelf in the late 1950s, such as digital encoders, were not adequate for the Unimate, so with Devol's guidance and a team of skilled engineers, Unimation designed and machined practically every part in the first Unimates. They also invented a variety of new technologies, including a unique rotating drum memory system with data parity controls. In 1960, Devol personally sold the first Unimate robot, which was shipped in 1961 to General Motors. GM first used the machine for die casting handling and spot welding of car bodies. The first Unimate robot was installed at GM's Inland Fisher Guide Plant in Ewing Township, New Jersey in 1961 to lift hot pieces of metal from a die-casting machine and stack them.…

Back to article

Article summary

Unimation was the world's first robotics company. It was founded in 1962 by Joseph F. Engelberger and George Devol and was located in Danbury, Connecticut. Devol had already applied for a patent an industrial robotic arm in 1954; was issued in 1961. Devol collaborated with Engelberger, who served as president of the company, to engineer and produce an industrial robot under the brand name Unimate. They introduced their new robot in 1961 at a trade show in Chicago. The first Unimate prototypes were controlled by vacuum tubes used as digital switches though later versions used transistors. Further, parts available off-the-shelf in the late 1950s, such as digital encoders, were not adequate for the Unimate, so with Devol's guidance and a team of skilled engineers, Unimation designed and machined practically every part in the first Unimates. They also invented a variety of new technologies, including a unique rotating drum memory system with data parity controls. In 1960, Devol personally sold the first Unimate robot, which was shipped in 1961 to General Motors. GM first used the machine for die casting handling and spot welding of car bodies. The first Unimate robot was installed at GM's Inland Fisher Guide Plant in Ewing Township, New Jersey in 1961 to lift hot pieces of metal from a die-casting machine and stack them.…

Key claims

  1. date of foundation: 1962 — source: Wikipedia, revision 1363889010, retrieved 2026-10-20 · confidence 0.95

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. The record states that the date of foundation is "1962". What evidence would count against this claim?
  3. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  4. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

  1. Wikipedia, “Unimation”, revision 1363889010, retrieved 2026-10-20 https://en.wikipedia.org/w/index.php?oldid=1363889010

Key claims and bibliography are generated from the same tracked claims and sources as the article page.